What it means
The Maytag range entry for FCE4 names the wi-fi antenna or the wiring. Reset first, then call us in if the code keeps coming back.
Maytag oven FCE4 / Wi-Fi and registration
The Maytag range entry for FCE4 names the wi-fi antenna or the wiring. Reset first, then call us in if the code keeps coming back.
Also printed as FCE4
The Maytag range entry for FCE4 names the wi-fi antenna or the wiring. Reset first, then call us in if the code keeps coming back.
Turn the breaker off before you touch anything behind a panel.
FCE4 will not clear after one proper reset.
Your Maytag to-do list, saved here on this device

Turn the breaker off before you touch anything behind a panel. If you smell gas, leave the house and call your gas utility from outside.

Check that your appliance is a range and copy FCE4 exactly as the display shows it.

Breaker off for one full minute, then back on, and look for FCE4.

Give the oven a minute on screen after the reset; a returning FCE4 means schedule a visit.

Have the network name and password ready before you re-pair the range.
Write down the model and serial numbers and the exact FCE4 wording before you call.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
Maytag's range page says FCE4 may come from the wi-fi antenna or the wiring. It stops there; no test and no ranking is given.
Read the supporting manualTurn the oven's circuit breaker off for one minute, switch it back on, then keep an eye on the oven for a further minute to see whether FCE4 comes back.
Read the supporting manualThe range list prints FCE3 next to FCE4, but with a different line. Look up the one on your display.
Read the supporting manualFCE4 is about the connection and not the heating. If the code keeps returning, stop and schedule a visit.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13805 / PH 13805 (range)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14335 / PH 14335 (wall oven)
FCE4 comes from Maytag Product Help (PH 13805) for the range, read in November 2026; the FCE4 entry names no models.
Maytag lists the wi-fi antenna or the wiring. It is a possible-cause list, not a confirmed failure.
Yes, give it the whole minute. If FCE4 is still there afterward, schedule a visit.
Not from the code alone: the entry lists the wi-fi antenna or the wiring and stops.
Model and serial numbers plus a note of what happened when FCE4 appeared.
Maytag codes, symptoms, parts and service
The Maytag page for FCE3 on a range states “The appliance could not connect to the router.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.