What it means
For FCE6, the Maytag range page points to the wi-fi power module or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
Maytag oven FCE6 / Wi-Fi and registration
For FCE6, the Maytag range page points to the wi-fi power module or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
Also printed as FCE6
For FCE6, the Maytag range page points to the wi-fi power module or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.
FCE6 will not clear after one proper reset.
Your Maytag to-do list, saved here on this device

Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.

Record FCE6 character by character and note the product type: range.

Leave the breaker off a whole minute before checking for FCE6 again.

Give the oven a minute on screen after the reset; a returning FCE6 means schedule a visit.

See whether other devices on your home Wi-Fi work, and how strong the signal is where the range stands.
Keep the model number close and note when FCE6 appeared and what the range was doing.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
A range showing FCE6 is, per Maytag, dealing with a possible problem in the wi-fi power module or the wiring. The page adds no diagnosis.
Read the supporting manualMaytag's reset is a minute at the breaker: off, wait, on. Then leave the oven in view for another minute and note whether FCE6 returns.
Read the supporting manualMaytag lists the wi-fi antenna or the wiring against FCE5, while FCE6 gets the wi-fi power module or the wiring. They are neighbors in the range list but separate entries.
Read the supporting manualFCE6 is about the connection and not the heating. If the code keeps returning, stop and schedule a visit.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13807 / PH 13807 (range)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14337 / PH 14337 (wall oven)
Facts for FCE6 are from the range table (PH 13807) of Maytag Product Help, checked November 2026; no model list is printed.
Maytag lists the wi-fi power module or the wiring. It is a possible-cause list, not a confirmed failure.
Try it first: one minute off, one minute on screen. If FCE6 persists, a technician should look.
The list is the wi-fi power module or the wiring; testing on site settles it.
Tell us the model, the display wording and when FCE6 first showed up.
Maytag codes, symptoms, parts and service
Maytag lists the wi-fi antenna or the wiring for FCE5 on the range. Reset the power first and watch the display; a returning the code is the cue to book us.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.