What it means
F9-3 on your range is tied by Maytag to the oven door latch, the door lock switch or the wiring. One reset costs nothing; if the code survives it, schedule a visit.
Maytag oven F9-3 / Door and lid
F9-3 on your range is tied by Maytag to the oven door latch, the door lock switch or the wiring. One reset costs nothing; if the code survives it, schedule a visit.
Also printed as F9-3
F9-3 on your range is tied by Maytag to the oven door latch, the door lock switch or the wiring. One reset costs nothing; if the code survives it, schedule a visit.
Turn the breaker off before you touch anything behind a panel.
F9-3 returns, or the range behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Turn the breaker off before you touch anything behind a panel. If you smell gas, leave the house and call your gas utility from outside.

Record F9-3 character by character and note the product type: range.

Breaker off for one full minute, then back on, and look for F9-3.

Once power is back, keep an eye on the oven for about a minute for F9-3.

Never force a locked door on the range. A latch that will not release is a job for a visit.
Note the model and the moment F9-3 showed up; both help us plan.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
F5 on a Maytag range or wall oven names the door latch assembly, the latch switches and the wiring as suspects.
Read the definitionFor F9-3 the range entry names the oven door latch, the door lock switch or the wiring. Nothing in it says which of them has failed.
Read the supporting manualMaytag's reset is a minute at the breaker: off, wait, on. Then leave the oven in view for another minute and note whether F9-3 returns.
Read the supporting manualF9-2 carries the same parts list as F9-3 on the range page. The reset is the same, only the code differs.
Read the supporting manualEveryday cooking can go on if the door closes fully, but avoid any cleaning cycle. Never open a panel on the range yourself.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13801 / PH 13801 (range)
Facts for F9-3 are from the range table (PH 13801) of Maytag Product Help, checked November 2026; no model list is printed.
Maytag names the oven door latch, the door lock switch or the wiring and gives no test to choose between them.
Yes, give it the whole minute. If F9-3 is still there afterward, schedule a visit.
Maytag names the oven door latch, the door lock switch or the wiring. Which one failed is for a technician with a meter to decide.
The model and serial numbers, the exact display for F9-3, and what the range was doing at the time.
Maytag codes, symptoms, parts and service
Maytag lists the oven door latch, the door lock switch or the wiring for F9-2 on the range. Reset the power first and watch the display; a returning the code is the cue to book us.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
F5 on a Maytag range or wall oven names the door latch assembly, the latch switches and the wiring as suspects. Product Help gives a one-minute breaker reset and asks you to verify oven operation afterward. A steam oven F5 page lists the reset alone.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.