What it means
Maytag lists the oven door latch, the door lock switch or the wiring for F9-2 on the range. Reset the power first and watch the display; a returning the code is the cue to book us.
Maytag oven F9-2 / Door and lid
Maytag lists the oven door latch, the door lock switch or the wiring for F9-2 on the range. Reset the power first and watch the display; a returning the code is the cue to book us.
Also printed as F9-2
Maytag lists the oven door latch, the door lock switch or the wiring for F9-2 on the range. Reset the power first and watch the display; a returning the code is the cue to book us.
Turn the breaker off before you touch anything behind a panel.
F9-2 will not clear after one proper reset.
Your Maytag to-do list, saved here on this device

Turn the breaker off before you touch anything behind a panel. If you smell gas, leave the house and call your gas utility from outside.

Record F9-2 character by character and note the product type: range.

Leave the breaker off a whole minute before checking for F9-2 again.

Run the oven briefly after the reset and see whether F9-2 comes back.

Never force a locked door on the range. A latch that will not release is a job for a visit.
Note the model and the moment F9-2 showed up; both help us plan.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
F5 on a Maytag range or wall oven names the door latch assembly, the latch switches and the wiring as suspects.
Read the definitionA range showing F9-2 is, per Maytag, dealing with a possible problem in the oven door latch, the door lock switch or the wiring. The page adds no diagnosis.
Read the supporting manualTurn the oven's circuit breaker off for one minute, switch it back on, then keep an eye on the oven for a further minute to see whether F9-2 comes back.
Read the supporting manualF9-1 and F9-2 name the same suspects in the range list; quote the code you actually see when booking.
Read the supporting manualEveryday cooking can go on if the door closes fully, but avoid any cleaning cycle. If F9-2 keeps returning, stop and schedule a visit.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13800 / PH 13800 (range)
F9-2 comes from Maytag Product Help (PH 13800) for the range, read in November 2026; the F9-2 entry names no models.
Maytag lists the oven door latch, the door lock switch or the wiring. It is a possible-cause list, not a confirmed failure.
It sometimes does. Breaker off for a full minute, then on, then a minute of watching. If F9-2 returns, schedule a visit.
Not from the code alone: the entry lists the oven door latch, the door lock switch or the wiring and stops.
Tell us the model, the display wording and when F9-2 first showed up.
Maytag codes, symptoms, parts and service
F9-1 on a range means Maytag suspects the oven door latch, the door lock switch or the wiring. Begin with the reset; if the code is back afterward, book a technician.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
F5 on a Maytag range or wall oven names the door latch assembly, the latch switches and the wiring as suspects. Product Help gives a one-minute breaker reset and asks you to verify oven operation afterward. A steam oven F5 page lists the reset alone.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.