What it means
F9-1 on a range means Maytag suspects the oven door latch, the door lock switch or the wiring. Begin with the reset; if the code is back afterward, book a technician.
Maytag oven F9-1 / Door and lid
F9-1 on a range means Maytag suspects the oven door latch, the door lock switch or the wiring. Begin with the reset; if the code is back afterward, book a technician.
Also printed as F9-1
F9-1 on a range means Maytag suspects the oven door latch, the door lock switch or the wiring. Begin with the reset; if the code is back afterward, book a technician.
Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.
F9-1 repeats after the reset.
Your Maytag to-do list, saved here on this device

Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.

Check that your appliance is a range and copy F9-1 exactly as the display shows it.

Leave the breaker off a whole minute before checking for F9-1 again.

Run the oven briefly after the reset and see whether F9-1 comes back.

If F9-1 showed after a self-clean, wait until the range is cool before you touch the door or the latch.
Note the model and the moment F9-1 showed up; both help us plan.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
F5 on a Maytag range or wall oven names the door latch assembly, the latch switches and the wiring as suspects.
Read the definitionFor F9-1 the range entry names the oven door latch, the door lock switch or the wiring. Nothing in it says which of them has failed.
Read the supporting manualTurn the oven's circuit breaker off for one minute, switch it back on, then keep an eye on the oven for a further minute to see whether F9-1 comes back.
Read the supporting manualMaytag gives F9-2 and F9-1 the same wording on the range page, so the same first step fits both.
Read the supporting manualThe page names the latch side, so the lock may not work as it should. Skip self-clean cycles until the range is checked. If F9-1 keeps returning, stop and schedule a visit.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13799 / PH 13799 (range)
Scope for F9-1: Maytag range, PH 13799, checked November 2026. Maytag lists no models on the F9-1 page.
F9-1 is printed against the oven door latch, the door lock switch or the wiring; the page does not narrow it down.
Yes, give it the whole minute. If F9-1 is still there afterward, schedule a visit.
Not from the code alone: the entry lists the oven door latch, the door lock switch or the wiring and stops.
Model and serial numbers plus a note of what happened when F9-1 appeared.
Maytag codes, symptoms, parts and service
Maytag lists the oven door latch, the door lock switch or the wiring for F9-2 on the range. Reset the power first and watch the display; a returning the code is the cue to book us.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
F5 on a Maytag range or wall oven names the door latch assembly, the latch switches and the wiring as suspects. Product Help gives a one-minute breaker reset and asks you to verify oven operation afterward. A steam oven F5 page lists the reset alone.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.