Maytag oven C83 / Information

Maytag oven
error code C83

Oven / display referenceC83

C83 is on the same Maytag range page as C81 and C82: the surface cooking area overheated and automatic shutoff was activated. Wait 5 minutes with the controls off, switch the cooktop back on, then do the one-minute breaker reset if it persists.

Also printed as C83

Last reviewed

Oven / display referenceC83
Meaning
C83 is on the same Maytag range page as C81 and C82: the surface cooking area overheated and automatic shutoff was activated. Wait 5 minutes with the controls off, switch the cooktop back on, then do the one-minute breaker reset if it persists.
Who handles it
Reset, then book
Related codes
Source
C81, C82 or C83 - Range - Product Help | Maytag

What Maytag oven C83 means.

What it means

C83 is on the same Maytag range page as C81 and C82: the surface cooking area overheated and automatic shutoff was activated. Wait 5 minutes with the controls off, switch the cooktop back on, then do the one-minute breaker reset if it persists.

What you can safely check

Turn the breaker off before you touch anything behind a panel.

When to call a technician

C83 returns after cooldown and reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 4 checks done
  1. Maytag oven C83: Range control panel with knobs and a display showing lit white segments, a roasted pork loin with vegetables in a metal pan on the glass cooktop beside it.
    Illustration. Follow your model’s instructions.
    Before you begin

    Shut the oven off first

    Maytag lists turning off the oven as the opening step, even though the code concerns the cooktop surface.

  2. Ranges & ovens in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Give it 5 minutes

    Wait the full time before touching the controls again.

  3. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 3

    Test the cooktop

    Turn it back on and verify cooktop operation.

  4. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Do the breaker reset

    Breaker off for a minute, back on, and monitor the cooktop for one minute.

Does C83 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

The touch panel and control.

Conceptual Range / oven sectionKeypad / touch panelControl boardElement wiring123
  1. 1Keypad / touch panel
  2. 3Element wiring

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

A little more context.

What does C83 mean?

The page titled "C81, C82 or C83 - Range" says the surface cooking area has overheated and automatic shutoff was activated.

Read the supporting manual

Does the oven matter for C83?

The first line says to turn off the oven if it is operating. The wording ties the shutoff to the cooktop surface, not to the oven cavity.

Read the supporting manual

What if the cooktop shuts off again?

The page ends with the reset: breaker off for one minute, on, then watch the cooktop for one minute.

Read the supporting manual

What does the guide say about elements?

The W10722063B guide says an element cycling on and off on High is normal, a temperature limiter keeping the cooktop from overheating.

Read the supporting manual

The manual behind the message.

Manufacturer document

C81, C82 or C83 - Range - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-08-16; PH 13811 / PH 13811 (range)

Manufacturer document

User Guide, Electric Range (W10722063B)

Maytag / Whirlpool Corporation (retailer copy kept by pdf.lowes.com)

W10722063B (11/14); PDF page numbers / p. 18

Product Help range page PH 13811, shared by C81, C82 and C83, plus the W10722063B guide for the element-cycling note.

Here to help

Good questions.
Clear answers.

Talk to our team
Is C83 the highest of the three codes?

Maytag does not rank them. The page prints one description for C81, C82 and C83.

Can I cook while waiting?

The page says to turn the oven off and wait 5 minutes for the surface to cool.

Does the reset need a tool?

No, only the breaker. Product Help asks for one minute off.

What should I tell the technician?

The code, which element was on, and whether the oven was also running.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.