What it means
On a range, the entry for C81 says “The surface cooking area has overheated and the automatic shutoff was activated.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
Maytag oven C81 / Information
On a range, the entry for C81 says “The surface cooking area has overheated and the automatic shutoff was activated.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
Also printed as C81
On a range, the entry for C81 says “The surface cooking area has overheated and the automatic shutoff was activated.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.
C81 will not clear after one proper reset.
Your Maytag to-do list, saved here on this device

Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.

Check that your appliance is a range and copy C81 exactly as the display shows it.

Power off for five full minutes, then on, and look for C81.

Give the oven a minute on screen after the reset; a returning C81 means schedule a visit.

Write down the exact words or symbols the range shows before you do anything.
Keep the model number close and note when C81 appeared and what the range was doing.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
The range entry for C81 reads “The surface cooking area has overheated and the automatic shutoff was activated.” That is the whole explanation Maytag prints.
Read the supporting manualMaytag asks for five minutes without power. Wait the full time, restore power, and note whether C81 reappears.
Read the supporting manualFEE8 is a neighbor of C81, not a synonym. The reset may overlap; the text does not.
Read the supporting manualUse the range if it behaves normally; stop if there are odd noises, smells or heat. Never open a panel on the range yourself.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13811 / PH 13811 (range)
Facts for C81 are from the range table (PH 13811) of Maytag Product Help, checked November 2026; no model list is printed.
The help page states “The surface cooking area has overheated and the automatic shutoff was activated.” Nothing else is added.
Yes, run it as printed and schedule a visit if C81 stays.
Not by itself; the page stops at the line it prints.
Tell us the model, the display wording and when C81 first showed up.
Maytag codes, symptoms, parts and service
For a range showing FEE8, Maytag prints “Power unit down by turning off the circuit breaker(s) for one (1) minute.” Try the one-minute breaker reset, and schedule a visit if the code returns.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.