Maytag oven 9d41 / Door and lid

Maytag oven
error code 9d41

Oven / display reference9d41

Maytag's range page links 9d41 to the oven door latch assembly, the door switch or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.

Also printed as 9d41

Last reviewed

Oven / display reference9d41
Meaning
Maytag's range page links 9d41 to the oven door latch assembly, the door switch or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
Who handles it
Reset, then book
Related codes
Source
9d41 - Error Code - Range - Product Help | Maytag

What Maytag oven 9d41 means.

What it means

Maytag's range page links 9d41 to the oven door latch assembly, the door switch or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.

What you can safely check

Turn the breaker off before you touch anything behind a panel.

When to call a technician

9d41 will not clear after one proper reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag oven 9d41: Cold open wall oven showing the motorized door latch lever, hook and switch behind the top trim, with the power plug lying unplugged on the floor nearby
    Illustration. Follow your model’s instructions.
    Before you begin

    Safety first

    Turn the breaker off before you touch anything behind a panel. If you smell gas, leave the house and call your gas utility from outside.

  2. Ranges & ovens in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Record the code

    Match the label on your appliance to the range list before you rely on the wording for 9d41.

  3. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 3

    Run the reset

    Leave the breaker off a whole minute before checking for 9d41 again.

  4. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    See if it returns

    Give the oven a minute on screen after the reset; a returning 9d41 means schedule a visit.

  5. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    If 9d41 showed after a self-clean, wait until the range is cool before you touch the door or the latch.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Gather details

    Write down the model and serial numbers and the exact 9d41 wording before you call.

Does 9d41 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

The door lock.

Conceptual Range / oven sectionDoorLock motor / latchControl123
  1. 1Door

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Parts behind the message.

Close view of a metal oven door latch hook mounted with two screws beside the open oven cavity

Component reference

Oven door latch and latch switches (F5)

F5 on a Maytag range or wall oven names the door latch assembly, the latch switches and the wiring as suspects.

Read the definition

A little more context.

Which entry in Maytag's range list covers 9d41?

Maytag's range page says 9d41 may come from the oven door latch assembly, the door switch or the wiring. It stops there; no test and no ranking is given.

Read the supporting manual

What goes first when the range flashes 9d41?

Take the oven off power at the breaker for a full minute. Put it back on and give it a minute of watching; if 9d41 stays away, the reset did its job.

Read the supporting manual

Can I treat 9d32 like 9d41?

9d32 and 9d41 name the same suspects in the range list; quote the code you actually see when booking.

Read the supporting manual

Do I switch the range off when 9d41 comes up?

A latch problem concerns the door and not the heat, so cook normally and keep cleaning cycles off. If 9d41 keeps returning, stop and schedule a visit.

Read the supporting manual

The manual behind the message.

Manufacturer document

9d41 - Error Code - Range - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-08-16; PH 13731 / PH 13731 (range)

Manufacturer document

9d41 - Wall Oven - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-11-08; PH 14391 / PH 14391 (wall oven)

9d41 comes from Maytag Product Help (PH 13731) for the range, read in November 2026; the 9d41 entry names no models.

Here to help

Good questions.
Clear answers.

Talk to our team
How should I read 9d41 on my range?

Maytag lists the oven door latch assembly, the door switch or the wiring. It is a possible-cause list, not a confirmed failure.

Will a one-minute breaker reset clear 9d41?

Try it first: one minute off, one minute on screen. If 9d41 persists, a technician should look.

Does 9d41 point to a single part?

No. the oven door latch assembly, the door switch or the wiring are all candidates and the page gives no way to choose.

What should I tell the technician about 9d41?

The model number, what 9d41 looked like, and whether the reset changed anything.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.