What it means
LdL on a Maytag top-load washer is explained as “If LdL (lid lock will not lock or lid lock failure) appears in the display, the lid is not locking.” No reset is printed for it, so schedule a visit if it keeps appearing.
Maytag washer LdL / Door and lid
LdL on a Maytag top-load washer is explained as “If LdL (lid lock will not lock or lid lock failure) appears in the display, the lid is not locking.” No reset is printed for it, so schedule a visit if it keeps appearing.
Also printed as LdL
LdL on a Maytag top-load washer is explained as “If LdL (lid lock will not lock or lid lock failure) appears in the display, the lid is not locking.” No reset is printed for it, so schedule a visit if it keeps appearing.
Power and water off before any panel comes off; towels down for spills.
LdL repeats after the reset.
Your Maytag to-do list, saved here on this device

Power and water off before any panel comes off; towels down for spills.

Match the label on your appliance to the top-load washer list before you rely on the wording for LdL.

Maytag prints no reset for LdL, so record what the washer does rather than guessing a fix.

Keep the model number close and note when LdL appeared and what the top-load washer was doing.

Do not force a locked door or lid; wait for the top-load washer to finish and release.
Keep the model number close and note when LdL appeared and what the top-load washer was doing.
Give us the model and the checks you have run, then open your request right here.
Book a visitA rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
On a Maytag front-load washer, F5E3 means the door is not locking properly and F22 is a front door lock issue.
Read the definitionHere is what Maytag prints for LdL on a top-load washer: “If LdL (lid lock will not lock or lid lock failure) appears in the display, the lid is not locking.”
Read the supporting manualNo reset is printed for LdL on the top-load washer page. Writing down what the washer does around the code is the useful thing to do.
Read the supporting manualThe top-load washer list prints LF next to LdL, but with a different line. Look up the one on your display.
Read the supporting manualDo not bypass or tape a door switch on the top-load washer. Never open a panel on the top-load washer yourself.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-07-03; PH 13152 / PH 13152 (top-load washer)
LdL comes from Maytag Product Help (PH 13152) for the top-load washer, read in November 2026; the LdL entry names no models.
On a top-load washer showing LdL, the help page states “If LdL (lid lock will not lock or lid lock failure) appears in the display, the lid is not locking.” Nothing else is added.
The page prints none. Write down what you see and schedule a visit if LdL keeps appearing.
No part is named for LdL; the page gives only the wording above.
The model number, what LdL looked like, and whether the reset changed anything.
Maytag codes, symptoms, parts and service
For a top-load washer showing LF, Maytag prints “If F8 E1 or LF (long fill) appears in the display, the washer is taking too long to fill.” No reset is printed for it, so schedule a visit if it keeps appearing.
A Maytag washer that leaves water in the tub usually points to the drain setup before the machine itself: a hose pushed too far into the standpipe, a standpipe under 30 inches, tape sealing the hose, or a clogged drain pump filter. Check those first; if water still stays, book a technician.
On a Maytag front-load washer, F5E3 means the door is not locking properly and F22 is a front door lock issue. Product Help says to shut the door completely, clear anything from the latch, and wipe soap buildup off the lock. F5E1 names the door switch.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.