Maytag washer F7E5 / Reset only

Maytag washer
error code F7E5

Washer / display reference

Maytag’s top-load washer page for F7E5 (PH 13453) prints no meaning for the code, only a reset: cut power to the washer for five minutes, then restore it. Book a visit if F7E5 returns.

Also printed as F7E5

Last reviewed

Washer / display reference
Meaning
Maytag’s top-load washer page for F7E5 (PH 13453) prints no meaning for the code, only a reset: cut power to the washer for five minutes, then restore it. Book a visit if F7E5 returns.
Who handles it
Reset, then book
Related codes
Source
F7E5 - Error Code - Product Help | Maytag

What Maytag washer F7E5 means.

What it means

Maytag’s top-load washer page for F7E5 (PH 13453) prints no meaning for the code, only a reset: cut power to the washer for five minutes, then restore it. Book a visit if F7E5 returns.

What you can safely check

Power and water off before any panel comes off; towels down for spills.

When to call a technician

F7E5 returns, or the top-load washer behaves oddly around the code.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag washer F7E5: Hand pressing a round button on a top-load washer panel next to a dial and a lit display, with a detergent jug on the shelf above
    Illustration. Follow your model’s instructions.
    Before you begin

    Stay safe

    Power and water off before any panel comes off; towels down for spills.

  2. Washers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Record the code

    Record F7E5 character by character and note the product type: top-load washer.

  3. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 3

    Reset the power

    Wait five minutes without power before you check for F7E5 again.

  4. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Watch afterward

    Give the washer a minute on screen after the reset; a returning F7E5 means schedule a visit.

  5. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    The control board lives behind panels on the top-load washer; keep them closed.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Gather details

    Write down the model and serial numbers and the exact F7E5 wording before you call.

Does F7E5 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

The control and its sensors.

Conceptual Washer sectionControl panelControl boardLevel sensorMotor wiring1234
  1. 1Control panel
  2. 2Control board
  3. 4Motor wiring

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

A little more context.

What does Maytag say F7E5 means?

Nothing. The top-load washer page (PH 13453, modified May 2025) gives no cause, no part and no meaning for F7E5; it has only a power reset.

Read the supporting manual

How do I reset the washer for F7E5?

Unplug the washer for 5 minutes and plug it back in, or switch its breaker off for 5 minutes and back on. Maytag compares it to restarting a computer.

Read the supporting manual

Will the reset fix F7E5?

Maytag says resetting the control can sometimes solve the issues you are experiencing, but it does not promise it. After the 5 minutes, watch the display for F7E5; if it is gone, run a short cycle and keep an eye on the washer.

Read the supporting manual

What should I tell the technician about F7E5?

Give us the model and serial numbers, the exact display, and what the washer was doing when F7E5 appeared. Say whether the reset cleared it, even for a short time, because a code that returns is the reason to book a visit.

Read the supporting manual

The manual behind the message.

Manufacturer document

F7E5 - Error Code - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2025-05-27; PH 13453 / PH 13453 (top-load washer)

Facts for F7E5 come from Maytag Product Help, top-load washer page (PH 13453), read in November 2026. The pages list no models.

Here to help

Good questions.
Clear answers.

Talk to our team
Does Maytag say what F7E5 means on a washer?

No. The top-load washer page prints only the reset instruction and no cause, so we cannot name a failed part and will not guess one.

How long should the washer stay without power for F7E5?

Five minutes, as printed. Unplug the washer or switch off its breaker for the full 5 minutes before restoring power, because a shorter wait may not reset the control.

Is there a front-load washer page for F7E5?

Not in the sources we hold. We cite only the top-load washer page (PH 13453), so we describe F7E5 for top-load washers only.

When should I book a visit for F7E5?

Book a visit if F7E5 returns after the 5-minute reset, or if the washer behaves oddly in other ways. Have the model and serial numbers ready.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.