What it means
Maytag's wall oven page links F6E6 to the upper oven appliance manager control or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
Maytag oven F6E6 / Control board
Maytag's wall oven page links F6E6 to the upper oven appliance manager control or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
Also printed as F6E6
Maytag's wall oven page links F6E6 to the upper oven appliance manager control or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
Turn the breaker off before you touch anything behind a panel.
F6E6 will not clear after one proper reset.
Your Maytag to-do list, saved here on this device

Turn the breaker off before you touch anything behind a panel. If you smell gas, leave the house and call your gas utility from outside.

Match the label on your appliance to the wall oven list before you rely on the wording for F6E6.

Cut power at the breaker for a minute, restore it, then check for F6E6.

Give the oven a minute on screen after the reset; a returning F6E6 means schedule a visit.

The control board lives behind panels on the wall oven; keep them closed.
Note the model and the moment F6E6 showed up; both help us plan.
Give us the model and the checks you have run, then open your request right here.
Book a visit

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
F6E6 is printed against the upper oven appliance manager control or the wiring. Maytag words it as a possible problem, not a finding.
Read the supporting manualMaytag's reset is a minute at the breaker: off, wait, on. Then leave the oven in view for another minute and note whether F6E6 returns.
Read the supporting manualRead the exact display: F6E2 means the appliance manager control, the converter control or the wiring on the wall oven page, and F6E6 means the upper oven appliance manager control or the wiring.
Read the supporting manualIf the wall oven behaves after the reset, using it is up to you; if F6E6 returns, stop and schedule a visit. If the code keeps returning, stop and schedule a visit.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-19; PH 14465 / PH 14465 (wall oven)
Scope for F6E6: Maytag wall oven, PH 14465, checked November 2026. Maytag lists no models on the F6E6 page.
Maytag lists the upper oven appliance manager control or the wiring. It is a possible-cause list, not a confirmed failure.
Try it first: one minute off, one minute on screen. If F6E6 persists, a technician should look.
Maytag names the upper oven appliance manager control or the wiring. Which one failed is for a technician with a meter to decide.
The model number, what F6E6 looked like, and whether the reset changed anything.
Maytag codes, symptoms, parts and service
F6E2 on your wall oven is tied by Maytag to the appliance manager control, the converter control or the wiring. One reset costs nothing; if the code survives it, schedule a visit.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.