F6 EA names the user interface on a range. The wall oven page is more specific: the user interface control sensing an over temperature condition, or the wiring. Let the oven cool, switch the breaker off for one minute and back on, then book a visit if it returns.
F6 EA names the user interface on a range. The wall oven page is more specific: the user interface control sensing an over temperature condition, or the wiring. Let the oven cool, switch the breaker off for one minute and back on, then book a visit if it returns.
F6 EA - Error Code - Range - Product Help | Maytag
What Maytag oven F6EA means.
What it means
F6 EA names the user interface on a range. The wall oven page is more specific: the user interface control sensing an over temperature condition, or the wiring. Let the oven cool, switch the breaker off for one minute and back on, then book a visit if it returns.
What you can safely check
Turn the breaker off before you touch anything behind a panel.
When to call a technician
F6 EA returns after the oven has cooled and the breaker reset.
Your Maytag to-do list, saved here on this device
Safe checks, in order.
0 of 4 checks done
Illustration. Follow your model’s instructions.
Before you begin
Let the oven cool first
The wall oven page describes an over temperature condition, so wait until the oven is cool before you test it again.
Illustration. Follow your model’s instructions.
Check 2
Reset the breaker
Switch it off for one minute, then on, and watch the oven for one minute.
Illustration. Follow your model’s instructions.
Check 3
Note how long the oven had been on
Tell us the temperature setting and how long it ran before the code showed.
Illustration. Follow your model’s instructions.
Check 4
Compare with F8 EA
F8 EA also names the user interface on the range tree; mention it if it appeared.
Does F6EA keep coming back?
Give us the model and the checks you have run, then open your request right here.
There may be a problem with the User Interface, or the associated wiring. The range page says nothing about temperature and does not describe the user interface.
There may be a problem with the User Interface Control sensing an over temperature condition, or with the associated wiring. Maytag does not say what temperature or where.
F6 E5 names the user interface on a range and the control panel assembly on a wall oven. F6 EA is the entry that mentions an over temperature condition on a wall oven.
The wall oven page says the control is sensing an over temperature condition, but it does not say the oven itself is too hot. It names the control and the wiring.
Does the range page mention temperature?
No. The range page for F6 EA lists only the user interface and the associated wiring.
Which part would you test?
On a wall oven we would test the user interface control and its wiring, as the page lists them. On a range we would start with the user interface.
Can I keep baking after the reset?
Maytag gives no statement on that. If F6 EA returns after cooling and a reset, stop using the oven and book a visit.