Maytag oven F6E2 / Control board

Maytag oven
error code F6E2

Oven / display reference

F6E2 on your wall oven is tied by Maytag to the appliance manager control, the converter control or the wiring. One reset costs nothing; if the code survives it, schedule a visit.

Also printed as F6E2

Last reviewed

Oven / display reference
Meaning
F6E2 on your wall oven is tied by Maytag to the appliance manager control, the converter control or the wiring. One reset costs nothing; if the code survives it, schedule a visit.
Who handles it
Reset, then book
Related codes
Source
F6 E2 - Error Code - Wall Oven - Product Help | Maytag

What Maytag oven F6E2 means.

What it means

F6E2 on your wall oven is tied by Maytag to the appliance manager control, the converter control or the wiring. One reset costs nothing; if the code survives it, schedule a visit.

What you can safely check

Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.

When to call a technician

F6E2 will not clear after one proper reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag oven F6E2: Wall oven with its top trim removed showing the green control board and fanned wire connectors, the black power cord and plug lying unplugged on the floor
    Illustration. Follow your model’s instructions.
    Before you begin

    Before you start

    Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.

  2. Ranges & ovens in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Check what you see

    Check that your appliance is a wall oven and copy F6E2 exactly as the display shows it.

  3. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 3

    Cut the power

    Leave the breaker off a whole minute before checking for F6E2 again.

  4. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Check the display

    Run the oven briefly after the reset and see whether F6E2 comes back.

  5. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    Ask yourself whether a power cut, storm or cleaning cycle came just before F6E2.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Gather details

    Note the model and the moment F6E2 showed up; both help us plan.

Does F6E2 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

The touch panel and control.

Conceptual Range / oven sectionKeypad / touch panelControl boardElement wiring123
  1. 1Keypad / touch panel

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

A little more context.

What does Maytag print beside F6E2 for a wall oven?

The wall oven list ties F6E2 to the appliance manager control, the converter control or the wiring. That is a set of candidates, and the page does not pick one.

Read the supporting manual

What is worth doing before I schedule a visit for F6E2?

Maytag's reset is a minute at the breaker: off, wait, on. Then leave the oven in view for another minute and note whether F6E2 returns.

Read the supporting manual

Can I treat F6EA like F6E2?

Read the exact display: F6EA means the user interface or the wiring on the wall oven page, and F6E2 means the appliance manager control, the converter control or the wiring.

Read the supporting manual

Can the wall oven keep running while F6E2 is showing?

The control runs everything on the wall oven, so a returning F6E2 is a reason to stop using it. Never open a panel on the wall oven yourself.

Read the supporting manual

The manual behind the message.

Manufacturer document

F6 E2 - Error Code - Wall Oven - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-11-18; PH 14461 / PH 14461 (wall oven)

F6E2 comes from Maytag Product Help (PH 14461) for the wall oven, read in November 2026; the F6E2 entry names no models.

Here to help

Good questions.
Clear answers.

Talk to our team
What is F6E2 on a Maytag wall oven?

The wall oven page ties F6E2 to the appliance manager control, the converter control or the wiring without saying which has failed.

Should I reset the power for F6E2?

Try it first: one minute off, one minute on screen. If F6E2 persists, a technician should look.

Does F6E2 point to a single part?

The list is the appliance manager control, the converter control or the wiring; testing on site settles it.

What should I tell the technician about F6E2?

Tell us the model, the display wording and when F6E2 first showed up.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.