F6 E3 names the Appliance Manager and its wiring on a range, and the wall oven page adds the Converter Control. Both pages say there are a variety of reasons it may happen. Switch the breaker off for one minute and back on; book a visit if it returns.
F6 E3 names the Appliance Manager and its wiring on a range, and the wall oven page adds the Converter Control. Both pages say there are a variety of reasons it may happen. Switch the breaker off for one minute and back on; book a visit if it returns.
F6 E3 - Error Code - Range - Product Help | Maytag
What Maytag oven F6E3 means.
What it means
F6 E3 names the Appliance Manager and its wiring on a range, and the wall oven page adds the Converter Control. Both pages say there are a variety of reasons it may happen. Switch the breaker off for one minute and back on; book a visit if it returns.
What you can safely check
Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.
When to call a technician
F6 E3 returns after the breaker reset.
Your Maytag to-do list, saved here on this device
Safe checks, in order.
0 of 4 checks done
Illustration. Follow your model’s instructions.
Before you begin
Check which page applies
The Converter Control appears only on the wall oven page.
Illustration. Follow your model’s instructions.
Check 2
Reset the breaker
Switch it off for one minute, then on, and watch the oven for one minute.
Illustration. Follow your model’s instructions.
Check 3
Note other F6 codes
If F6 E1 or F6 E2 also appeared, tell us; their pages read almost the same.
Illustration. Follow your model’s instructions.
Check 4
Leave the control closed
Both named parts sit behind panels and are tested on site.
Does F6E3 keep coming back?
Give us the model and the checks you have run, then open your request right here.
There may be a problem with the Appliance Manager, or the associated wiring, and "there are a variety of different reasons this may be happening". Maytag does not describe the part or list the reasons.
Reset the power at the breaker for one minute and watch the oven. If F6 E3 returns, book a visit; Maytag gives no owner repair and no way to narrow the cause.