What it means
Maytag's range page links F6E1 to the appliance manager or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
Maytag oven F6E1 / Control board
Maytag's range page links F6E1 to the appliance manager or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
Also printed as F6E1
Maytag's range page links F6E1 to the appliance manager or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
Turn the breaker off before you touch anything behind a panel.
F6E1 returns, or the range behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Turn the breaker off before you touch anything behind a panel. If you smell gas, leave the house and call your gas utility from outside.

Match the label on your appliance to the range list before you rely on the wording for F6E1.

Cut power at the breaker for a minute, restore it, then check for F6E1.

Once power is back, keep an eye on the oven for about a minute for F6E1.

The control board lives behind panels on the range; keep them closed.
Write down the model and serial numbers and the exact F6E1 wording before you call.
Give us the model and the checks you have run, then open your request right here.
Book a visit

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
The range list ties F6E1 to the appliance manager or the wiring. That is a set of candidates, and the page does not pick one.
Read the supporting manualTake the oven off power at the breaker for a full minute. Put it back on and give it a minute of watching; if F6E1 stays away, the reset did its job.
Read the supporting manualF6E0 sits beside F6E1 on the range page and names the oven control, the appliance manager or the wiring; the code names the appliance manager or the wiring.
Read the supporting manualIf the range behaves after the reset, using it is up to you; if F6E1 returns, stop and schedule a visit. Never open a panel on the range yourself.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13788 / PH 13788 (range)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-18; PH 14460 / PH 14460 (wall oven)
Scope for F6E1: Maytag range, PH 13788, checked November 2026. Maytag lists no models on the F6E1 page.
The range page ties F6E1 to the appliance manager or the wiring without saying which has failed.
Yes, give it the whole minute. If F6E1 is still there afterward, schedule a visit.
No. the appliance manager or the wiring are all candidates and the page gives no way to choose.
The model and serial numbers, the exact display for F6E1, and what the range was doing at the time.
Maytag codes, symptoms, parts and service
For F6E0, the Maytag range page points to the oven control, the appliance manager or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.