Maytag oven F6E0 / Control board

Maytag oven
error code F6E0

Oven / display reference

For F6E0, the Maytag range page points to the oven control, the appliance manager or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.

Also printed as F6E0

Last reviewed

Oven / display reference
Meaning
For F6E0, the Maytag range page points to the oven control, the appliance manager or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
Who handles it
Reset, then book
Related codes
Source
F6 E0 - Error Code - Range - Product Help | Maytag

What Maytag oven F6E0 means.

What it means

For F6E0, the Maytag range page points to the oven control, the appliance manager or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.

What you can safely check

Turn the breaker off before you touch anything behind a panel.

When to call a technician

F6E0 returns, or the range behaves oddly around the code.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag oven F6E0: Wall oven with its top trim removed showing the green control board and fanned wire connectors, the black power cord and plug lying unplugged on the floor
    Illustration. Follow your model’s instructions.
    Before you begin

    Before you start

    Turn the breaker off before you touch anything behind a panel. If you smell gas, leave the house and call your gas utility from outside.

  2. Ranges & ovens in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Record the code

    Record F6E0 character by character and note the product type: range.

  3. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 3

    Power-cycle it

    Leave the breaker off a whole minute before checking for F6E0 again.

  4. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Watch afterward

    Once power is back, keep an eye on the oven for about a minute for F6E0.

  5. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    Note whether the display, keys and lights of the range behave normally, or whether other odd things happen near F6E0.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Write it down

    Write down the model and serial numbers and the exact F6E0 wording before you call.

Does F6E0 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

The touch panel and control.

Conceptual Range / oven sectionKeypad / touch panelControl boardElement wiring123
  1. 1Keypad / touch panel

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Parts behind the message.

A stainless wall oven under oak cabinets, its glass control strip showing blue lit segment characters.

Component reference

Oven control and user interface (F1-7, F1-8, F3, F6)

Maytag range pages for F1-7, F3 and F6 point at the control board of the oven, or the wiring to it.

Read the definition

A little more context.

What is Maytag saying with F6E0 on your range?

A range showing F6E0 is, per Maytag, dealing with a possible problem in the oven control, the appliance manager or the wiring. The page adds no diagnosis.

Read the supporting manual

What do I try at home first for F6E0?

Turn the oven's circuit breaker off for one minute, switch it back on, then keep an eye on the oven for a further minute to see whether F6E0 comes back.

Read the supporting manual

Is F6E0 the same as F6E1 on a range?

Maytag lists the appliance manager or the wiring against F6E1, while F6E0 gets the oven control, the appliance manager or the wiring. They are neighbors in the range list but separate entries.

Read the supporting manual

Is the range fine to use with F6E0 on the display?

A control problem can stop heating or cause odd behavior, so stay near the range while it runs.

Read the supporting manual

The manual behind the message.

Manufacturer document

F6 E0 - Error Code - Range - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-08-16; PH 13787 / PH 13787 (range)

Manufacturer document

F6 E0 - Error Code - Wall Oven - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-11-18; PH 14459 / PH 14459 (wall oven)

Facts for F6E0 are from the range table (PH 13787) of Maytag Product Help, checked November 2026; no model list is printed.

Here to help

Good questions.
Clear answers.

Talk to our team
How should I read F6E0 on my range?

The range page ties F6E0 to the oven control, the appliance manager or the wiring without saying which has failed.

Can a breaker reset fix F6E0?

It is the page's first step and costs nothing. A returning F6E0 afterward means schedule us.

Which parts does Maytag blame for F6E0?

Not from the code alone: the entry lists the oven control, the appliance manager or the wiring and stops.

What should I have ready when I schedule for F6E0?

The model number, what F6E0 looked like, and whether the reset changed anything.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.