What it means
F5E7 on a range means Maytag suspects the oven door latch assembly, the door switch or the wiring. Begin with the reset; if the code is back afterward, book a technician.
Maytag oven F5E7 / Door and lid
F5E7 on a range means Maytag suspects the oven door latch assembly, the door switch or the wiring. Begin with the reset; if the code is back afterward, book a technician.
Also printed as F5E7
F5E7 on a range means Maytag suspects the oven door latch assembly, the door switch or the wiring. Begin with the reset; if the code is back afterward, book a technician.
Turn the breaker off before you touch anything behind a panel.
F5E7 will not clear after one proper reset.
Your Maytag to-do list, saved here on this device

Turn the breaker off before you touch anything behind a panel. If you smell gas, leave the house and call your gas utility from outside.

Record F5E7 character by character and note the product type: range.

Cut power at the breaker for a minute, restore it, then check for F5E7.

Run the oven briefly after the reset and see whether F5E7 comes back.

Never force a locked door on the range. A latch that will not release is a job for a visit.
Keep the model number close and note when F5E7 appeared and what the range was doing.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
F5 on a Maytag range or wall oven names the door latch assembly, the latch switches and the wiring as suspects.
Read the definitionF5E7 is printed against the oven door latch assembly, the door switch or the wiring. Maytag words it as a possible problem, not a finding.
Read the supporting manualMaytag's reset is a minute at the breaker: off, wait, on. Then leave the oven in view for another minute and note whether F5E7 returns.
Read the supporting manualRead the exact display: F5E5 means the door hinges or the door gasket on the range page, and F5E7 means the oven door latch assembly, the door switch or the wiring.
Read the supporting manualA latch problem concerns the door and not the heat, so cook normally and keep cleaning cycles off.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13785 / PH 13785 (range)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14456 / PH 14456 (wall oven)
Scope for F5E7: Maytag range, PH 13785, checked November 2026. Maytag lists no models on the F5E7 page.
F5E7 is printed against the oven door latch assembly, the door switch or the wiring; the page does not narrow it down.
It is the page's first step and costs nothing. A returning F5E7 afterward means schedule us.
No. the oven door latch assembly, the door switch or the wiring are all candidates and the page gives no way to choose.
The model and serial numbers, the exact display for F5E7, and what the range was doing at the time.
Maytag codes, symptoms, parts and service
F5 E5 has two meanings on Maytag's pages. The range page says the oven has not reached self-clean temperature after 30 minutes and points at the door hinges or door gasket. The wall oven page names the door latch assembly, door switch or wiring.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
F5 on a Maytag range or wall oven names the door latch assembly, the latch switches and the wiring as suspects. Product Help gives a one-minute breaker reset and asks you to verify oven operation afterward. A steam oven F5 page lists the reset alone.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.