What it means
Maytag lists the lower oven door latch assembly, the door switch or the wiring for F5E4 on the wall oven. Reset the power first and watch the display; a returning the code is the cue to book us.
Maytag oven F5E4 / Door and lid
Maytag lists the lower oven door latch assembly, the door switch or the wiring for F5E4 on the wall oven. Reset the power first and watch the display; a returning the code is the cue to book us.
Also printed as F5E4
Maytag lists the lower oven door latch assembly, the door switch or the wiring for F5E4 on the wall oven. Reset the power first and watch the display; a returning the code is the cue to book us.
Turn the breaker off before you touch anything behind a panel.
F5E4 will not clear after one proper reset.
Your Maytag to-do list, saved here on this device

Turn the breaker off before you touch anything behind a panel. If you smell gas, leave the house and call your gas utility from outside.

Match the label on your appliance to the wall oven list before you rely on the wording for F5E4.

Leave the breaker off a whole minute before checking for F5E4 again.

Once power is back, keep an eye on the oven for about a minute for F5E4.

If F5E4 showed after a self-clean, wait until the wall oven is cool before you touch the door or the latch.
Keep the model number close and note when F5E4 appeared and what the wall oven was doing.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
F5 on a Maytag range or wall oven names the door latch assembly, the latch switches and the wiring as suspects.
Read the definitionA wall oven showing F5E4 is, per Maytag, dealing with a possible problem in the lower oven door latch assembly, the door switch or the wiring. The page adds no diagnosis.
Read the supporting manualMaytag's reset is a minute at the breaker: off, wait, on. Then leave the oven in view for another minute and note whether F5E4 returns.
Read the supporting manualF5E7 sits beside F5E4 on the wall oven page and names the oven door latch assembly, the door switch or the wiring; the code names the lower oven door latch assembly, the door switch or the wiring.
Read the supporting manualThe page names the latch side, so the lock may not work as it should. Skip self-clean cycles until the wall oven is checked.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14454 / PH 14454 (wall oven)
F5E4 comes from Maytag Product Help (PH 14454) for the wall oven, read in November 2026; the F5E4 entry names no models.
Maytag names the lower oven door latch assembly, the door switch or the wiring and gives no test to choose between them.
Yes, give it the whole minute. If F5E4 is still there afterward, schedule a visit.
Not from the code alone: the entry lists the lower oven door latch assembly, the door switch or the wiring and stops.
Model and serial numbers plus a note of what happened when F5E4 appeared.
Maytag codes, symptoms, parts and service
F5E7 on a range means Maytag suspects the oven door latch assembly, the door switch or the wiring. Begin with the reset; if the code is back afterward, book a technician.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
F5 on a Maytag range or wall oven names the door latch assembly, the latch switches and the wiring as suspects. Product Help gives a one-minute breaker reset and asks you to verify oven operation afterward. A steam oven F5 page lists the reset alone.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.