F5 E2 names the door latch assembly, the door switch or the wiring. The range page says "Main Oven Door Latch Assembly" and the wall oven page says only "Door Latch Assembly". Switch the breaker off for one minute and back on; book a visit if it returns.
F5 E2 names the door latch assembly, the door switch or the wiring. The range page says "Main Oven Door Latch Assembly" and the wall oven page says only "Door Latch Assembly". Switch the breaker off for one minute and back on; book a visit if it returns.
F5 E2 - Error Code - Range - Product Help | Maytag
What Maytag oven F5E2 means.
What it means
F5 E2 names the door latch assembly, the door switch or the wiring. The range page says "Main Oven Door Latch Assembly" and the wall oven page says only "Door Latch Assembly". Switch the breaker off for one minute and back on; book a visit if it returns.
What you can safely check
Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.
When to call a technician
F5 E2 returns after the breaker reset.
Your Maytag to-do list, saved here on this device
Safe checks, in order.
0 of 4 checks done
Illustration. Follow your model’s instructions.
Before you begin
Note which oven it is
The range page says Main Oven and the wall oven page names no cavity, so tell us which oven showed the code.
Illustration. Follow your model’s instructions.
Check 2
Close the door fully
Check that nothing is caught in the door and that it shuts evenly before you reset anything.
Illustration. Follow your model’s instructions.
Check 3
Reset the breaker
Switch it off for one minute, then on, and watch the oven for one minute.
Illustration. Follow your model’s instructions.
Check 4
Do not force the latch
The latch and the door switch are tested on site; do not pry at them.
Does F5E2 keep coming back?
Give us the model and the checks you have run, then open your request right here.
There may be a problem with the Main Oven Door Latch Assembly, the Door Switch, or the associated wiring. Maytag does not say why it writes "Main Oven".
The wall oven page drops the words "Main Oven" and lists the Door Latch Assembly, the Door Switch or the wiring. F5 E3 on the same tree names the Lower Oven latch.
Reset the power at the breaker for one minute and watch the oven. If F5 E2 returns, book a visit; Maytag lists three possible problems and gives no owner repair.
The page lists them as two possible problems, the Door Latch Assembly and the Door Switch, plus the wiring. It does not say which one applies.
Can a door that does not close fully cause F5 E2?
Maytag does not say so. Making sure the door shuts fully is a sensible first look, but the page itself only lists the latch, the switch and the wiring.
Does F5 E2 mean I cannot use the oven?
Maytag gives no statement on that. If the code returns after the reset, stop using the oven and book a visit.
Why does the range page say Main Oven?
Maytag does not explain the wording. We show it as printed and use the page for your oven type.