What it means
F5E0 on your range is tied by Maytag to the oven door latch assembly, the door switch or the wiring. One reset costs nothing; if the code survives it, schedule a visit.
Maytag oven F5E0 / Door and lid
F5E0 on your range is tied by Maytag to the oven door latch assembly, the door switch or the wiring. One reset costs nothing; if the code survives it, schedule a visit.
Also printed as F5E0
F5E0 on your range is tied by Maytag to the oven door latch assembly, the door switch or the wiring. One reset costs nothing; if the code survives it, schedule a visit.
Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.
F5E0 will not clear after one proper reset.
Your Maytag to-do list, saved here on this device

Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.

Record F5E0 character by character and note the product type: range.

Breaker off for one full minute, then back on, and look for F5E0.

Run the oven briefly after the reset and see whether F5E0 comes back.

Never force a locked door on the range. A latch that will not release is a job for a visit.
Note the model and the moment F5E0 showed up; both help us plan.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
F5 on a Maytag range or wall oven names the door latch assembly, the latch switches and the wiring as suspects.
Read the definitionThe range list ties F5E0 to the oven door latch assembly, the door switch or the wiring. That is a set of candidates, and the page does not pick one.
Read the supporting manualTake the oven off power at the breaker for a full minute. Put it back on and give it a minute of watching; if F5E0 stays away, the reset did its job.
Read the supporting manualMaytag lists the main oven door latch assembly, the door switch or the wiring against F5E1, while F5E0 gets the oven door latch assembly, the door switch or the wiring. They are neighbors in the range list but separate entries.
Read the supporting manualThe page names the latch side, so the lock may not work as it should. Skip self-clean cycles until the range is checked.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13780 / PH 13780 (range)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14450 / PH 14450 (wall oven)
F5E0 comes from Maytag Product Help (PH 13780) for the range, read in November 2026; the F5E0 entry names no models.
Maytag names the oven door latch assembly, the door switch or the wiring and gives no test to choose between them.
Try it first: one minute off, one minute on screen. If F5E0 persists, a technician should look.
Not from the code alone: the entry lists the oven door latch assembly, the door switch or the wiring and stops.
The model number, what F5E0 looked like, and whether the reset changed anything.
Maytag codes, symptoms, parts and service
Maytag's pages split on F5: the pages for the range and wall oven state the page names these possible trouble spots: door latch switches, oven door latch assembly or wiring; the steam oven page offers a reset and nothing more. To reset it, leave the circuit breaker off for 1 minute before switching it back on.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
F5 on a Maytag range or wall oven names the door latch assembly, the latch switches and the wiring as suspects. Product Help gives a one-minute breaker reset and asks you to verify oven operation afterward. A steam oven F5 page lists the reset alone.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.