Maytag oven 9d62 / Door and lid

Maytag oven
error code 9d62

Oven / display reference9d62

Maytag lists the oven door latch assembly, the door switch or the wiring for 9d62 on the range. Reset the power first and watch the display; a returning the code is the cue to book us.

Also printed as 9d62

Last reviewed

Oven / display reference9d62
Meaning
Maytag lists the oven door latch assembly, the door switch or the wiring for 9d62 on the range. Reset the power first and watch the display; a returning the code is the cue to book us.
Who handles it
Reset, then book
Related codes
Source
9d62 - Error Code - Range - Product Help | Maytag

What Maytag oven 9d62 means.

What it means

Maytag lists the oven door latch assembly, the door switch or the wiring for 9d62 on the range. Reset the power first and watch the display; a returning the code is the cue to book us.

What you can safely check

Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.

When to call a technician

9d62 will not clear after one proper reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag oven 9d62: Cold open wall oven showing the motorized door latch lever, hook and switch behind the top trim, with the power plug lying unplugged on the floor nearby
    Illustration. Follow your model’s instructions.
    Before you begin

    Safety first

    Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.

  2. Ranges & ovens in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Match your model

    Match the label on your appliance to the range list before you rely on the wording for 9d62.

  3. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 3

    Reset the power

    Leave the breaker off a whole minute before checking for 9d62 again.

  4. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Watch afterward

    Give the oven a minute on screen after the reset; a returning 9d62 means schedule a visit.

  5. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    If 9d62 showed after a self-clean, wait until the range is cool before you touch the door or the latch.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Write it down

    Write down the model and serial numbers and the exact 9d62 wording before you call.

Does 9d62 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

The door lock.

Conceptual Range / oven sectionDoorLock motor / latchControl123
  1. 1Door

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Parts behind the message.

Close view of a metal oven door latch hook mounted with two screws beside the open oven cavity

Component reference

Oven door latch and latch switches (F5)

F5 on a Maytag range or wall oven names the door latch assembly, the latch switches and the wiring as suspects.

Read the definition

A little more context.

What does Maytag print beside 9d62 for a range?

Maytag's range page says 9d62 may come from the oven door latch assembly, the door switch or the wiring. It stops there; no test and no ranking is given.

Read the supporting manual

How do I handle 9d62 on the range step by step?

Turn the oven's circuit breaker off for one minute, switch it back on, then keep an eye on the oven for a further minute to see whether 9d62 comes back.

Read the supporting manual

What separates 9d62 from 9d61?

9d61 carries the same parts list as 9d62 on the range page. The reset is the same, only the code differs.

Read the supporting manual

Do I switch the range off when 9d62 comes up?

A latch problem concerns the door and not the heat, so cook normally and keep cleaning cycles off.

Read the supporting manual

The manual behind the message.

Manufacturer document

9d62 - Error Code - Range - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-08-16; PH 13736 / PH 13736 (range)

Manufacturer document

9d62 - Wall Oven - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-11-08; PH 14396 / PH 14396 (wall oven)

9d62 comes from Maytag Product Help (PH 13736) for the range, read in November 2026; the 9d62 entry names no models.

Here to help

Good questions.
Clear answers.

Talk to our team
What does 9d62 mean for a range?

9d62 is printed against the oven door latch assembly, the door switch or the wiring; the page does not narrow it down.

Should I reset the power for 9d62?

It sometimes does. Breaker off for a full minute, then on, then a minute of watching. If 9d62 returns, schedule a visit.

Does 9d62 point to a single part?

Maytag names the oven door latch assembly, the door switch or the wiring. Which one failed is for a technician with a meter to decide.

What do you need to know about 9d62?

Model and serial numbers plus a note of what happened when 9d62 appeared.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.