What it means
9d52 on your range is tied by Maytag to the oven door latch assembly, the door switch or the wiring. One reset costs nothing; if the code survives it, schedule a visit.
Maytag oven 9d52 / Door and lid
9d52 on your range is tied by Maytag to the oven door latch assembly, the door switch or the wiring. One reset costs nothing; if the code survives it, schedule a visit.
Also printed as 9d52
9d52 on your range is tied by Maytag to the oven door latch assembly, the door switch or the wiring. One reset costs nothing; if the code survives it, schedule a visit.
Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.
9d52 will not clear after one proper reset.
Your Maytag to-do list, saved here on this device

Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.

Record 9d52 character by character and note the product type: range.

Leave the breaker off a whole minute before checking for 9d52 again.

Give the oven a minute on screen after the reset; a returning 9d52 means schedule a visit.

Never force a locked door on the range. A latch that will not release is a job for a visit.
Note the model and the moment 9d52 showed up; both help us plan.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
F5 on a Maytag range or wall oven names the door latch assembly, the latch switches and the wiring as suspects.
Read the definition9d52 is printed against the oven door latch assembly, the door switch or the wiring. Maytag words it as a possible problem, not a finding.
Read the supporting manualMaytag's reset is a minute at the breaker: off, wait, on. Then leave the oven in view for another minute and note whether 9d52 returns.
Read the supporting manual9d51 and 9d52 name the same suspects in the range list; quote the code you actually see when booking.
Read the supporting manualThe page names the latch side, so the lock may not work as it should. Skip self-clean cycles until the range is checked. Never open a panel on the range yourself.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13734 / PH 13734 (range)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14394 / PH 14394 (wall oven)
Facts for 9d52 are from the range table (PH 13734) of Maytag Product Help, checked November 2026; no model list is printed.
The range page ties 9d52 to the oven door latch assembly, the door switch or the wiring without saying which has failed.
Try it first: one minute off, one minute on screen. If 9d52 persists, a technician should look.
The list is the oven door latch assembly, the door switch or the wiring; testing on site settles it.
Model and serial numbers plus a note of what happened when 9d52 appeared.
Maytag codes, symptoms, parts and service
For 9d51, the Maytag range page points to the oven door latch assembly, the door switch or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
F5 on a Maytag range or wall oven names the door latch assembly, the latch switches and the wiring as suspects. Product Help gives a one-minute breaker reset and asks you to verify oven operation afterward. A steam oven F5 page lists the reset alone.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.