What it means
For 9d22, the Maytag range page points to the oven door latch assembly, the door switch or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
Maytag oven 9d22 / Door and lid
For 9d22, the Maytag range page points to the oven door latch assembly, the door switch or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
Also printed as 9d22
For 9d22, the Maytag range page points to the oven door latch assembly, the door switch or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
Turn the breaker off before you touch anything behind a panel.
9d22 repeats after the reset.
Your Maytag to-do list, saved here on this device

Turn the breaker off before you touch anything behind a panel. If you smell gas, leave the house and call your gas utility from outside.

Check that your appliance is a range and copy 9d22 exactly as the display shows it.

Breaker off for one full minute, then back on, and look for 9d22.

Once power is back, keep an eye on the oven for about a minute for 9d22.

If 9d22 showed after a self-clean, wait until the range is cool before you touch the door or the latch.
Write down the model and serial numbers and the exact 9d22 wording before you call.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
F5 on a Maytag range or wall oven names the door latch assembly, the latch switches and the wiring as suspects.
Read the definitionA range showing 9d22 is, per Maytag, dealing with a possible problem in the oven door latch assembly, the door switch or the wiring. The page adds no diagnosis.
Read the supporting manualTake the oven off power at the breaker for a full minute. Put it back on and give it a minute of watching; if 9d22 stays away, the reset did its job.
Read the supporting manual9d21 and 9d22 name the same suspects in the range list; quote the code you actually see when booking.
Read the supporting manualThe page names the latch side, so the lock may not work as it should. Skip self-clean cycles until the range is checked. Never open a panel on the range yourself.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13728 / PH 13728 (range)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14388 / PH 14388 (wall oven)
Facts for 9d22 are from the range table (PH 13728) of Maytag Product Help, checked November 2026; no model list is printed.
Maytag names the oven door latch assembly, the door switch or the wiring and gives no test to choose between them.
Try it first: one minute off, one minute on screen. If 9d22 persists, a technician should look.
No. the oven door latch assembly, the door switch or the wiring are all candidates and the page gives no way to choose.
Tell us the model, the display wording and when 9d22 first showed up.
Maytag codes, symptoms, parts and service
For 9d21, the Maytag range page points to the oven door latch assembly, the door switch or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
F5 on a Maytag range or wall oven names the door latch assembly, the latch switches and the wiring as suspects. Product Help gives a one-minute breaker reset and asks you to verify oven operation afterward. A steam oven F5 page lists the reset alone.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.