What it means
On a dryer, the entry for AF or "Check Vent" says “An AF (Restricted Air Flow) or 'Check Vent' error code indicates that the lint screen or vent is clogged; the...” Nothing else is printed, so schedule a visit if it repeats.
Maytag dryer AF or "Check Vent" / Fan and airflow
On a dryer, the entry for AF or "Check Vent" says “An AF (Restricted Air Flow) or 'Check Vent' error code indicates that the lint screen or vent is clogged; the...” Nothing else is printed, so schedule a visit if it repeats.
Also printed as AF or "Check Vent"
On a dryer, the entry for AF or "Check Vent" says “An AF (Restricted Air Flow) or 'Check Vent' error code indicates that the lint screen or vent is clogged; the...” Nothing else is printed, so schedule a visit if it repeats.
Power off before any panel comes off; lint and burnt smells mean stop and leave the dryer off.
AF or "Check Vent" returns, or the dryer behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Power off before any panel comes off; lint and burnt smells mean stop and leave the dryer off.

Check that your appliance is a dryer and copy AF or "Check Vent" exactly as the display shows it.

Maytag prints no reset for AF or "Check Vent", so record what the dryer does rather than guessing a fix.

Keep the model number close and note when AF or "Check Vent" appeared and what the dryer was doing.

Do not run the dryer with the lint screen out.
Write down the model and serial numbers and the exact AF or "Check Vent" wording before you call.
Give us the model and the checks you have run, then open your request right here.
Book a visitA rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
Long dry times on a Maytag dryer often trace to airflow.
Read the definition
Component reference
The lint screen is the removable screen that catches lint from the air leaving a Maytag dryer.
Read the definitionThe dryer entry for AF or "Check Vent" reads “An AF (Restricted Air Flow) or 'Check Vent' error code indicates that the lint screen or vent is clogged; the vent is crushed, kinked or has too many...” That is the whole explanation Maytag prints.
Read the supporting manualMaytag's page for AF or "Check Vent" gives no reset or checking steps, so there is no page-approved first move beyond noting exactly what the dryer shows.
Read the supporting manualE3 is a separate entry from AF or "Check Vent" on the dryer page, with its own wording.
Read the supporting manualA blocked vent raises heat and fire risk, so do not keep drying until the airflow is clear. If AF or "Check Vent" keeps returning, stop and schedule a visit.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2025-06-04; PH 12774 / PH 12774 (dryer)
AF or "Check Vent" comes from Maytag Product Help (PH 12774) for the dryer, read in November 2026; the AF or "Check Vent" entry names no models.
On the dryer page the line is “An AF (Restricted Air Flow) or 'Check Vent' error code indicates that the lint screen or vent is clogged; the vent is crushed, kinked or has too many...” No further cause is given.
No; Maytag gives AF or "Check Vent" no reset steps. If it repeats, schedule a visit.
Nothing about replacing parts is printed for AF or "Check Vent".
The model and serial numbers, the exact display for AF or "Check Vent", and what the dryer was doing at the time.
Maytag codes, symptoms, parts and service
The Maytag page for E3 on a commercial-grade residential dryer states “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
A Maytag dryer that does nothing is usually a power, lock or latch issue before it is a broken part. An electric dryer draws on two breakers or fuses and needs 240 volts, the Control Lock may be on, and the door may look shut without latching. Check these, then book a technician.
Long dry times on a Maytag dryer often trace to airflow. F4E3, AF and Check Vent all say the lint screen or vent is clogged, crushed, kinked or has too many turns. Product Help wants the lint screen cleaned after every use and the home venting every one to two years.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.