What it means
The Maytag page for E3 on a commercial-grade residential dryer states “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
Maytag dryer E3 / Reset only
The Maytag page for E3 on a commercial-grade residential dryer states “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
Also printed as E3
The Maytag page for E3 on a commercial-grade residential dryer states “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
Unplug the dryer or switch off its breaker before opening any panel, clean lint regularly, and if you smell gas leave the house and call your gas utility.
E3 returns, or the commercial-grade residential dryer behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Unplug the dryer or switch off its breaker before opening any panel, clean lint regularly, and if you smell gas leave the house and call your gas utility.

Match the label on your appliance to the commercial-grade residential dryer list before you rely on the wording for E3.

Power off for five full minutes, then on, and look for E3.

Give the dryer a minute on screen after the reset; a returning E3 means schedule a visit.

Note when E3 appears: at start, mid-cycle or after a power cut.
Keep the model number close and note when E3 appeared and what the commercial-grade residential dryer was doing.
Give us the model and the checks you have run, then open your request right here.
Book a visitA rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
Here is what Maytag prints for E3 on a commercial-grade residential dryer: “Power unit down by turning off the circuit breaker(s) for 5 minutes.”
Read the supporting manualLeave the dryer off power for five full minutes, switch it back on, and check the display for E3.
Read the supporting manualThe commercial-grade residential dryer list prints E2 next to E3, but with a different line. Look up the one on your display.
Read the supporting manualUse the commercial-grade residential dryer if it behaves normally; stop if there are odd noises, smells or heat.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2021-07-28; PH 11808 / PH 11808 (commercial-grade residential dryer)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2023-12-07; PH 12782 / PH 12782 (dryer)
Scope for E3: Maytag commercial-grade residential dryer, PH 11808, checked November 2026. Maytag lists no models on the E3 page.
Maytag's wording is “Power unit down by turning off the circuit breaker(s) for 5 minutes.” That is the whole entry.
It may. Cut power for the full five minutes, restore it and watch. If E3 returns, schedule a visit.
Maytag names no part here. Read the message and follow the steps.
The model number, what E3 looked like, and whether the reset changed anything.
Maytag codes, symptoms, parts and service
For a commercial-grade residential dryer showing E2, Maytag prints “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
A Maytag dryer that does nothing is usually a power, lock or latch issue before it is a broken part. An electric dryer draws on two breakers or fuses and needs 240 volts, the Control Lock may be on, and the door may look shut without latching. Check these, then book a technician.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.