What it means
For a commercial-grade residential dryer showing E2, Maytag prints “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
Maytag dryer E2 / Reset only
For a commercial-grade residential dryer showing E2, Maytag prints “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
Also printed as E2
For a commercial-grade residential dryer showing E2, Maytag prints “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
Unplug the dryer or switch off its breaker before opening any panel, clean lint regularly, and if you smell gas leave the house and call your gas utility.
E2 repeats after the reset.
Your Maytag to-do list, saved here on this device

Unplug the dryer or switch off its breaker before opening any panel, clean lint regularly, and if you smell gas leave the house and call your gas utility.

Record E2 character by character and note the product type: commercial-grade residential dryer.

Wait five minutes without power before you check for E2 again.

Run the dryer briefly after the reset and see whether E2 comes back.

Write down the exact words or symbols the commercial-grade residential dryer shows before you do anything.
Keep the model number close and note when E2 appeared and what the commercial-grade residential dryer was doing.
Give us the model and the checks you have run, then open your request right here.
Book a visitA rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
Here is what Maytag prints for E2 on a commercial-grade residential dryer: “Power unit down by turning off the circuit breaker(s) for 5 minutes.”
Read the supporting manualCut power to the dryer for five minutes at the breaker or by cycling power as the page says, then restore it and see whether E2 comes back.
Read the supporting manualE1 is a separate entry from E2 on the commercial-grade residential dryer page, with its own wording.
Read the supporting manualWhether the commercial-grade residential dryer is safe depends on how it behaves, not the message alone.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2021-07-28; PH 11807 / PH 11807 (commercial-grade residential dryer)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2023-12-07; PH 12781 / PH 12781 (dryer)
E2 comes from Maytag Product Help (PH 11807) for the commercial-grade residential dryer, read in November 2026; the E2 entry names no models.
On the commercial-grade residential dryer page the line is “Power unit down by turning off the circuit breaker(s) for 5 minutes.” No further cause is given.
Try it first; five minutes is the printed time. A returning E2 means schedule us.
Not by itself; the page stops at the line it prints.
The model and serial numbers, the exact display for E2, and what the commercial-grade residential dryer was doing at the time.
Maytag codes, symptoms, parts and service
E1 on a Maytag commercial-grade residential dryer is explained as “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Try the five-minute power-off reset, and schedule a visit if the code returns.
A Maytag dryer that does nothing is usually a power, lock or latch issue before it is a broken part. An electric dryer draws on two breakers or fuses and needs 240 volts, the Control Lock may be on, and the door may look shut without latching. Check these, then book a technician.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.