Maytag dryer PF / Power supply

Maytag dryer
error code PF

Dryer / display referencePF

On a commercial-grade residential dryer, the entry for PF says “A PF (Power Failure) error code indicates that the drying cycle has been interrupted by a power failure.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.

Also printed as PF

Last reviewed

Dryer / display referencePF
Meaning
On a commercial-grade residential dryer, the entry for PF says “A PF (Power Failure) error code indicates that the drying cycle has been interrupted by a power failure.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
Who handles it
Reset, then book
Related codes
Source
PF - Error Code - Commercial Dryer - Product Help | Maytag

What Maytag dryer PF means.

What it means

On a commercial-grade residential dryer, the entry for PF says “A PF (Power Failure) error code indicates that the drying cycle has been interrupted by a power failure.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.

What you can safely check

Power off before any panel comes off; lint and burnt smells mean stop and leave the dryer off.

When to call a technician

PF returns, or the commercial-grade residential dryer behaves oddly around the code.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag dryer PF: Back of a dryer with the terminal block cover removed showing its wires, the four-prong cord unplugged on the floor near a wall receptacle.
    Illustration. Follow your model’s instructions.
    Before you begin

    Stay safe

    Power off before any panel comes off; lint and burnt smells mean stop and leave the dryer off.

  2. Dryers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Read the display

    Record PF character by character and note the product type: commercial-grade residential dryer.

  3. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 3

    Cut the power

    Cut power at the breaker for a minute, restore it, then check for PF.

  4. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Check the display

    Run the dryer briefly after the reset and see whether PF comes back.

  5. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    Check the breaker for the commercial-grade residential dryer: a dryer needs both legs, and a tripped one can leave the drum dead.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Write it down

    Note the model and the moment PF showed up; both help us plan.

Does PF keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

Heat and its safety limits.

Conceptual Dryer sectionHeaterThermostat / fuseDrumControl1234
  1. 2Thermostat / fuse
  2. 3Drum
  3. 4Control

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

A little more context.

Which entry in Maytag's commercial-grade residential dryer list covers PF?

PF is covered by this wording on the commercial-grade residential dryer page: “A PF (Power Failure) error code indicates that the drying cycle has been interrupted by a power failure.”

Read the supporting manual

What do I try at home first for PF?

Take the dryer off power at the breaker for a full minute. Put it back on and give it a minute of watching; if PF stays away, the reset did its job.

Read the supporting manual

Why do PF and L2 sit side by side in Maytag's list?

L2 is a separate entry from PF on the commercial-grade residential dryer page, with its own wording.

Read the supporting manual

Should the family keep using the commercial-grade residential dryer with PF showing?

If you see scorching at the plug or outlet, stop and call an electrician.

Read the supporting manual

The manual behind the message.

Manufacturer document

PF - Error Code - Commercial Dryer - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2025-10-21; PH 11805 / PH 11805 (commercial-grade residential dryer)

Manufacturer document

PF - Error Code - Dryer - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2025-05-27; PH 12839 / PH 12839 (dryer)

Facts for PF are from the commercial-grade residential dryer table (PH 11805) of Maytag Product Help, checked November 2026; no model list is printed.

Here to help

Good questions.
Clear answers.

Talk to our team
What does Maytag say PF means?

For PF on this commercial-grade residential dryer, Maytag's wording is “A PF (Power Failure) error code indicates that the drying cycle has been interrupted by a power failure.” That is the whole entry.

Should I reset the power for PF?

Yes, give it the whole minute. If PF is still there afterward, schedule a visit.

Is a specific part blamed for PF?

Nothing about replacing parts is printed for PF.

What do you need to know about PF?

Tell us the model, the display wording and when PF first showed up.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.