What it means
For a commercial-grade residential dryer showing L2, Maytag prints “There May be a Problem with the Home Power Supply:.” Try the one-minute breaker reset, and schedule a visit if the code returns.
Maytag dryer L2 / Power supply
For a commercial-grade residential dryer showing L2, Maytag prints “There May be a Problem with the Home Power Supply:.” Try the one-minute breaker reset, and schedule a visit if the code returns.
Also printed as L2
For a commercial-grade residential dryer showing L2, Maytag prints “There May be a Problem with the Home Power Supply:.” Try the one-minute breaker reset, and schedule a visit if the code returns.
Unplug the dryer or switch off its breaker before opening any panel, clean lint regularly, and if you smell gas leave the house and call your gas utility.
L2 returns, or the commercial-grade residential dryer behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Unplug the dryer or switch off its breaker before opening any panel, clean lint regularly, and if you smell gas leave the house and call your gas utility.

Match the label on your appliance to the commercial-grade residential dryer list before you rely on the wording for L2.

Cut power at the breaker for a minute, restore it, then check for L2.

Give the dryer a minute on screen after the reset; a returning L2 means schedule a visit.

Look at the plug and outlet only from the outside; do not touch burnt marks.
Keep the model number close and note when L2 appeared and what the commercial-grade residential dryer was doing.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
Here is what Maytag prints for L2 on a commercial-grade residential dryer: “There May be a Problem with the Home Power Supply:.”
Read the supporting manualTake the dryer off power at the breaker for a full minute. Put it back on and give it a minute of watching; if L2 stays away, the reset did its job.
Read the supporting manual6E is a separate entry from L2 on the commercial-grade residential dryer page, with its own wording.
Read the supporting manualDo not run the commercial-grade residential dryer on a questionable supply.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2025-10-21; PH 11804 / PH 11804 (commercial-grade residential dryer)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2025-05-27; PH 12837 / PH 12837 (dryer)
Scope for L2: Maytag commercial-grade residential dryer, PH 11804, checked November 2026. Maytag lists no models on the L2 page.
The commercial-grade residential dryer page reads “There May be a Problem with the Home Power Supply:.” It prints nothing more about cause.
It sometimes does. Breaker off for a full minute, then on, then a minute of watching. If L2 returns, schedule a visit.
Nothing about replacing parts is printed for L2.
The model and serial numbers, the exact display for L2, and what the commercial-grade residential dryer was doing at the time.
Maytag codes, symptoms, parts and service
Maytag's commercial-grade residential dryer page words 6E like this: “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
A Maytag dryer that does nothing is usually a power, lock or latch issue before it is a broken part. An electric dryer draws on two breakers or fuses and needs 240 volts, the Control Lock may be on, and the door may look shut without latching. Check these, then book a technician.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.