What it means
The Maytag page for -:-- (dashes in the display) on a dryer states “Power Cycle.” Try the five-minute power-off reset, and schedule a visit if the code returns.
Maytag dryer -:-- (dashes in the display) / Reset only
The Maytag page for -:-- (dashes in the display) on a dryer states “Power Cycle.” Try the five-minute power-off reset, and schedule a visit if the code returns.
Also printed as -:-- (dashes in the display)
The Maytag page for -:-- (dashes in the display) on a dryer states “Power Cycle.” Try the five-minute power-off reset, and schedule a visit if the code returns.
Unplug the dryer or switch off its breaker before opening any panel, clean lint regularly, and if you smell gas leave the house and call your gas utility.
-:-- (dashes in the display) returns, or the dryer behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Unplug the dryer or switch off its breaker before opening any panel, clean lint regularly, and if you smell gas leave the house and call your gas utility.

Record -:-- (dashes in the display) character by character and note the product type: dryer.

Power off for five full minutes, then on, and look for -:-- (dashes in the display).

Run the dryer briefly after the reset and see whether -:-- (dashes in the display) comes back.

Check your model manual for what -:-- (dashes in the display) means before treating it as a breakdown.
Write down the model and serial numbers and the exact -:-- (dashes in the display) wording before you call.
Give us the model and the checks you have run, then open your request right here.
Book a visitA rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
The dryer entry for -:-- (dashes in the display) reads “Power Cycle.” That is the whole explanation Maytag prints.
Read the supporting manualCut power to the dryer for five minutes at the breaker or by cycling power as the page says, then restore it and see whether -:-- (dashes in the display) comes back.
Read the supporting manualAF or "Check Vent" is a separate entry from -:-- (dashes in the display) on the dryer page, with its own wording.
Read the supporting manualWhether the dryer is safe depends on how it behaves, not the message alone. If -:-- (dashes in the display) keeps returning, stop and schedule a visit.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2025-05-27; PH 12831 / PH 12831 (dryer)
Scope for -:-- (dashes in the display): Maytag dryer, PH 12831, checked November 2026. Maytag lists no models on the -:-- (dashes in the display) page.
The help page states “Power Cycle.” Nothing else is added.
Try it first; five minutes is the printed time. A returning -:-- (dashes in the display) means schedule us.
Nothing about replacing parts is printed for -:-- (dashes in the display).
The model and serial numbers, the exact display for -:-- (dashes in the display), and what the dryer was doing at the time.
Maytag codes, symptoms, parts and service
On a dryer, the entry for AF or "Check Vent" says “An AF (Restricted Air Flow) or 'Check Vent' error code indicates that the lint screen or vent is clogged; the...” Nothing else is printed, so schedule a visit if it repeats.
A Maytag dryer that does nothing is usually a power, lock or latch issue before it is a broken part. An electric dryer draws on two breakers or fuses and needs 240 volts, the Control Lock may be on, and the door may look shut without latching. Check these, then book a technician.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.