Maytag dishwasher Sanitize Light Flashing / Display and signals

Maytag dishwasher
error code Sanitize Light Flashing

Dishwasher / display referenceSanitize Light Flashing

For a dishwasher showing Sanitize Light Flashing, Maytag prints “The Sani LED will flash if the dishwasher detects the temperature requirements for sanitization were not met.” Cut the power for 30 seconds, then restore it; schedule a visit if the code is still there.

Also printed as Sanitize Light Flashing

Last reviewed

Dishwasher / display referenceSanitize Light Flashing
Meaning
For a dishwasher showing Sanitize Light Flashing, Maytag prints “The Sani LED will flash if the dishwasher detects the temperature requirements for sanitization were not met.” Cut the power for 30 seconds, then restore it; schedule a visit if the code is still there.
Who handles it
Information only
Source
Sanitize Light Flashing - Dishwasher - Product Help | Maytag

What Maytag dishwasher Sanitize Light Flashing means.

What it means

For a dishwasher showing Sanitize Light Flashing, Maytag prints “The Sani LED will flash if the dishwasher detects the temperature requirements for sanitization were not met.” Cut the power for 30 seconds, then restore it; schedule a visit if the code is still there.

What you can safely check

Close the water valve and the breaker before any panel comes off.

When to call a technician

Sanitize Light Flashing repeats after the reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag dishwasher Sanitize Light Flashing: Top edge of a stainless dishwasher door cracked open, with a dark control strip showing two blue dashes and small blue indicator lights.
    Illustration. Follow your model’s instructions.
    Before you begin

    Stay safe

    Close the water valve and the breaker before any panel comes off.

  2. Dishwashers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Match your model

    Check that your appliance is a dishwasher and copy Sanitize Light Flashing exactly as the display shows it.

  3. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 3

    Power-cycle it

    Wait a full thirty seconds without power before you check for Sanitize Light Flashing again.

  4. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    See if it returns

    Run the dishwasher briefly after the reset and see whether Sanitize Light Flashing comes back.

  5. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    Look in the tub for standing water, and check the filter and spray arm for blockage.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Write it down

    Keep the model number close and note when Sanitize Light Flashing appeared and what the dishwasher was doing.

Does Sanitize Light Flashing keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

The control and its wiring.

Conceptual dishwasher sectionKeypadControl boardMotor wiringHeater wiring1234
  1. 1Keypad
  2. 2Control board
  3. 3Motor wiring
  4. 4Heater wiring

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

A little more context.

How does the Maytag dishwasher page explain Sanitize Light Flashing?

Maytag's dishwasher page gives Sanitize Light Flashing a single line: “The Sani LED will flash if the dishwasher detects the temperature requirements for sanitization were not met.” It adds nothing about cause.

Read the supporting manual

How do I handle Sanitize Light Flashing on the dishwasher step by step?

Cut power to the dishwasher for 30 seconds, then restore it and check whether Sanitize Light Flashing returns.

Read the supporting manual

How far apart are Sanitize Light Flashing and Control Light Flashing?

Control Light Flashing is a separate entry from Sanitize Light Flashing on the dishwasher page, with its own wording.

Read the supporting manual

Is the dishwasher fine to use with Sanitize Light Flashing on the display?

If the tub fills or leaks, shut off the water supply and call us. If Sanitize Light Flashing keeps returning, stop and schedule a visit.

Read the supporting manual

The manual behind the message.

Manufacturer document

Sanitize Light Flashing - Dishwasher - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2025-05-27; PH 12616 / PH 12616 (dishwasher)

Manufacturer document

Sanitize Light Flashing - Dishwasher - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2025-05-27; PH 12640 / PH 12640 (dishwasher)

Scope for Sanitize Light Flashing: Maytag dishwasher, PH 12616, checked November 2026. Maytag lists no models on the Sanitize Light Flashing page.

Here to help

Good questions.
Clear answers.

Talk to our team
What does Maytag say Sanitize Light Flashing means?

Maytag's wording is “The Sani LED will flash if the dishwasher detects the temperature requirements for sanitization were not met.” That is the whole entry.

Can a quick power-off reset fix Sanitize Light Flashing?

Try it first; thirty seconds is the printed time. A returning Sanitize Light Flashing means schedule us.

Is a specific part blamed for Sanitize Light Flashing?

Nothing about replacing parts is printed for Sanitize Light Flashing.

What do you need to know about Sanitize Light Flashing?

The model and serial numbers, the exact display for Sanitize Light Flashing, and what the dishwasher was doing at the time.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.