Maytag dishwasher Clean Light Flashing / Information

Maytag dishwasher
error code Clean Light Flashing

Dishwasher / display referenceClean Light Flashing

Maytag's dishwasher page words Clean Light Flashing like this: “Maytag dishwashers use a two-part flashing sequence to communicate specific errors.” No reset is printed for it, so schedule a visit if it keeps appearing.

Also printed as Clean Light Flashing

Last reviewed

Dishwasher / display referenceClean Light Flashing
Meaning
Maytag's dishwasher page words Clean Light Flashing like this: “Maytag dishwashers use a two-part flashing sequence to communicate specific errors.” No reset is printed for it, so schedule a visit if it keeps appearing.
Who handles it
Information only
Source
Clean Light Flashing - Dishwasher - Product Help | Maytag

What Maytag dishwasher Clean Light Flashing means.

What it means

Maytag's dishwasher page words Clean Light Flashing like this: “Maytag dishwashers use a two-part flashing sequence to communicate specific errors.” No reset is printed for it, so schedule a visit if it keeps appearing.

What you can safely check

Close the water valve and the breaker before any panel comes off.

When to call a technician

Clean Light Flashing will not clear after one proper reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag dishwasher Clean Light Flashing: Dishwashers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Before you begin

    Stay safe

    Close the water valve and the breaker before any panel comes off.

  2. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 2

    Read the display

    Record Clean Light Flashing character by character and note the product type: dishwasher.

  3. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 3

    Power-cycle it

    No reset is printed here; note the behavior of the dishwasher around Clean Light Flashing instead.

  4. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 4

    Check the display

    Note the model and the moment Clean Light Flashing showed up; both help us plan.

  5. Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    Note which stage of the cycle Clean Light Flashing appeared in.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Write it down

    Write down the model and serial numbers and the exact Clean Light Flashing wording before you call.

Does Clean Light Flashing keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

The control and its wiring.

Conceptual dishwasher sectionKeypadControl boardMotor wiringHeater wiring1234
  1. 1Keypad
  2. 2Control board
  3. 3Motor wiring
  4. 4Heater wiring

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

A little more context.

What does Clean Light Flashing stand for on a dishwasher?

Clean Light Flashing is covered by this wording on the dishwasher page: “Maytag dishwashers use a two-part flashing sequence to communicate specific errors.”

Read the supporting manual

Which first steps does Maytag give for Clean Light Flashing?

No reset is printed for Clean Light Flashing on the dishwasher page. Writing down what the dishwasher does around the code is the useful thing to do.

Read the supporting manual

Why do Clean Light Flashing and All Cycle And Option Lights flashing sit side by side in Maytag's list?

The dishwasher list prints All Cycle And Option Lights flashing next to Clean Light Flashing, but with a different line. Look up the one on your display.

Read the supporting manual

Do I switch the dishwasher off when Clean Light Flashing comes up?

If the tub fills or leaks, shut off the water supply and call us. Never open a panel on the dishwasher yourself.

Read the supporting manual

The manual behind the message.

Manufacturer document

Clean Light Flashing - Dishwasher - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2026-06-15; PH 12615 / PH 12615 (dishwasher)

Scope for Clean Light Flashing: Maytag dishwasher, PH 12615, checked November 2026. Maytag lists no models on the Clean Light Flashing page.

Here to help

Good questions.
Clear answers.

Talk to our team
How should I read Clean Light Flashing on my dishwasher?

The help page states “Maytag dishwashers use a two-part flashing sequence to communicate specific errors.” Nothing else is added.

What does Maytag suggest for Clean Light Flashing?

There is no reset on that page. Note what happens and book us if Clean Light Flashing persists.

Is a specific part blamed for Clean Light Flashing?

Maytag names no part here. Read the message and follow the steps.

What should I tell the technician about Clean Light Flashing?

Tell us the model, the display wording and when Clean Light Flashing first showed up.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.