What it means
Maytag's dishwasher page words All Cycle And Option Lights flashing like this: “Firmly close the door until it latches.” Try the 30-second power-off reset, and schedule a visit if the code returns.
Maytag dishwasher All Cycle And Option Lights flashing / Door and lid
Maytag's dishwasher page words All Cycle And Option Lights flashing like this: “Firmly close the door until it latches.” Try the 30-second power-off reset, and schedule a visit if the code returns.
Also printed as All Cycle And Option Lights flashing
Maytag's dishwasher page words All Cycle And Option Lights flashing like this: “Firmly close the door until it latches.” Try the 30-second power-off reset, and schedule a visit if the code returns.
Switch off power and the water supply before opening anything, and wipe up spills so nobody slips.
All Cycle And Option Lights flashing returns, or the dishwasher behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Switch off power and the water supply before opening anything, and wipe up spills so nobody slips.

Check that your appliance is a dishwasher and copy All Cycle And Option Lights flashing exactly as the display shows it.

Power off for 30 seconds, then on, and look for All Cycle And Option Lights flashing.

Give the dishwasher a minute on screen after the reset; a returning All Cycle And Option Lights flashing means schedule a visit.
Look in the tub for standing water, and check the filter and spray arm for blockage.
Keep the model number close and note when All Cycle And Option Lights flashing appeared and what the dishwasher was doing.
Give us the model and the checks you have run, then open your request right here.
Book a visitA rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
All Cycle And Option Lights flashing is covered by this wording on the dishwasher page: “Firmly close the door until it latches.”
Read the supporting manualCut power to the dishwasher for 30 seconds, then restore it and check whether All Cycle And Option Lights flashing returns.
Read the supporting manualThe dishwasher list prints H2O next to All Cycle And Option Lights flashing, but with a different line. Look up the one on your display.
Read the supporting manualStop the dishwasher and leave it off if water is leaking; wipe up spills so nobody slips. Never open a panel on the dishwasher yourself.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2026-06-15; PH 12614 / PH 12614 (dishwasher)
Scope for All Cycle And Option Lights flashing: Maytag dishwasher, PH 12614, checked November 2026. Maytag lists no models on the All Cycle And Option Lights flashing page.
Maytag's wording is “Firmly close the door until it latches.” That is the whole entry.
Try it first; thirty seconds is the printed time. A returning All Cycle And Option Lights flashing means schedule us.
Maytag names no part here. Read the message and follow the steps.
Model and serial numbers plus a note of what happened when All Cycle And Option Lights flashing appeared.
Maytag codes, symptoms, parts and service
Maytag Product Help prints H2O as “Not Detecting Water”: make sure the water supply is on, check for kinks in the supply hose, then press Start and the dishwasher will try to fill and resume. The page also lists it as F8E1 or H20.
A burnt smell from a Maytag dishwasher is often plastic or food that fell by the heating element. Let the tub cool for at least 30 minutes, clear the debris, and run a rinse or cleaning cycle. A hot tar or petroleum smell on a new dishwasher is the sound-deadening coating and should fade in 4 to 6 weeks.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.