Inside the appliance
Range convection fan. In plain English.
The convection fan in a Maytag oven or range stirs the hot air. Product Help says it may run during preheat even on non-convection settings, begins right away on electric convection models, waits about five minutes on gas ones and shuts off whenever the door is opened.

Where it fits.
Range convection fan in the appliance
Mounting position is not described in Product Help.
This image is an example of the component type. It will not tell you which replacement is right for your model.
How you can tell this system is asking for attention.
Range convection fan trouble can show up along with weaker performance or a code that keeps coming back. It takes testing to say whether this component is the reason.

Maytag range and oven noises
Most oven noises on a Maytag range are ordinary working sounds. Clicking is the ignitor trying to light the flame, and a fan that runs during and after cooking is the convection or cooling fan. Open the door to tell them apart: the convection fan stops, the cooling fan keeps going.

Maytag range self-clean cycle not working
A Maytag range self-clean that will not begin is usually waiting on the oven or the door. Too hot and it will not start: AquaLift needs the cavity under 200 degrees F, steam clean under 170 degrees F. On a high-temperature clean the door must close completely or it will not lock. Check which cycle your range has.
Owner care, within the model instructions.
Power the machine down and pull the plug ahead of any check you make yourself. Beware of pooled water and sharp bits of debris. Never handle a wet plug or electrical parts, take off a service panel or go beyond what your model’s owner guide permits.
- 1
Open and close the door
The fan stops when the door opens, so quiet at that moment is expected.
- 2
Choose the right cycle
A standard bake setting keeps the fan idle through most of the cycle. Choose convection to have it run.
- 3
Allow for the delay
Electric convection starts the fan immediately; gas convection takes roughly 5 minutes.
- 4
Use your manual
Details differ by model, so read the Owner's Manual for yours.
Cleaning or replacement?
Leave internal testing to a technician.
Convection is selected with the door closed, yet the fan never turns.
The fan scrapes or grinds.
Convection results are uneven.
Arrange a diagnosticSources and model boundaries.
These sources stand behind the Range convection fan advice. Read the manual for your own model.
- Convection Fan Not Running - Product Help | Maytag
- Fan Noise - Convection - Range - Product Help | Maytag
Follow the guide for your own model, and see how we research these pages.
Why is the fan on during plain baking?
Maytag treats fan operation during preheat and some non-convection functions as normal.
Why did the fan cut out?
The door was opened; that turns the fan off.
How soon does a gas model start it?
About five minutes after you start preheat or pick convection; electric models start straight away.
Will bake keep it running?
Not through most of a bake cycle. A convection setting is needed for steady fan use.
Maytag codes, symptoms, parts and service
From the message to what you do next.
Maytag range and oven noises
Most oven noises on a Maytag range are ordinary working sounds. Clicking is the ignitor trying to light the flame, and a fan that runs during and after cooking is the convection or cooling fan. Open the door to tell them apart: the convection fan stops, the cooling fan keeps going.
Range repair
Book a diagnostic for your model, done at the machine.
Find your metro
Office details, and the entry information to pass along.

