Maytag washer LF commercial / Commercial-grade washer

Maytag washer
error code LF commercial

Washer / display referenceLF commercial

On Maytag's commercial-grade residential washer, LF (too long to fill) means the washer is taking too long to fill, or is filling and draining. Check the drain hose depth, make sure hot and cold water are both on, latch the lid and press Start for up to 3 seconds.

Also printed as LF

Last reviewed

Washer / display referenceLF commercial
Meaning
On Maytag's commercial-grade residential washer, LF (too long to fill) means the washer is taking too long to fill, or is filling and draining. Check the drain hose depth, make sure hot and cold water are both on, latch the lid and press Start for up to 3 seconds.
Who handles it
Owner checks first, then a technician
Related codes
Source
Lid Lock is Flashing - Commercial Grade Washer - Product Help | Maytag

What Maytag washer LF commercial means.

What it means

On Maytag's commercial-grade residential washer, LF (too long to fill) means the washer is taking too long to fill, or is filling and draining. Check the drain hose depth, make sure hot and cold water are both on, latch the lid and press Start for up to 3 seconds.

What you can safely check

The page says you may need to press and hold the Start button for up to 3 seconds to engage the cycle.

When to call a technician

LF returns after the drain hose, both water supplies and the lid have been checked.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 5 checks done
  1. Maytag washer LF commercial: Washers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Before you begin

    Press and hold Start

    The page says you may need to press and hold the Start button for up to 3 seconds to engage the cycle.

  2. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 2

    Latch the lid completely

    The lid must be completely closed and latched for the washer to operate.

  3. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 3

    Check the drain hose

    The page says a drain hose that reaches more than 4.5 inches (114 mm) into the standpipe can make the washer siphon, filling and draining at once. Attach it with a drain hose form, and do not tape over the drain opening.

  4. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 4

    Check both water supplies

    Connect both inlet hoses and turn on both the hot and the cold water. The sensors need water at both hoses.

  5. Illustration. Follow your model’s instructions.
    Check 5

    Check the cycle selection

    The selector knob must sit on a cycle before you press Start. The page uses Normal as its example.

Does LF commercial keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

The control and its sensors.

Conceptual Washer sectionControl panelControl boardLevel sensorMotor wiring1234
  1. 1Control panel
  2. 2Control board
  3. 4Motor wiring

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

A little more context.

What does LF mean on a commercial-grade washer?

LF stands for too long to fill. The washer takes too long to fill or is filling and draining at once.

Read the supporting manual

What should I check first?

Press and hold Start for up to 3 seconds and close the lid completely so it latches.

Read the supporting manual

What about the drain hose and water?

Keep the drain hose from reaching more than 4.5 inches (114 mm) into the standpipe, and turn on both hot and cold water.

Read the supporting manual

The manual behind the message.

Manufacturer document

Lid Lock is Flashing - Commercial Grade Washer - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2025-06-16; PH 11756 / PH 11756 (commercial-grade residential washer)

Manufacturer document

Lid Lock is Not On - Commercial Grade Washer - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2025-06-17; PH 11757 / PH 11757 (commercial-grade residential washer)

Manufacturer document

Lid Lock is Solid Red - Commercial Grade Washer - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2025-06-17; PH 14783 / PH 14783 (commercial-grade residential washer)

Facts come from three Maytag Product Help lid-lock pages for the commercial-grade residential washer (PH 11756, 11757, 14783), which carry identical text. Maytag has no error-code tree for this washer, so the codes are printed inside the lid-lock questions. These are commercial-grade units, not the household front-load or top-load washers.

Here to help

Good questions.
Clear answers.

Talk to our team
What does LF mean on a commercial-grade washer?

Maytag words it as too long to fill: the washer is taking too long to fill, or it is filling and draining.

Is LF the same as F8E1 here?

Maytag prints them together in one sentence, F8 E1 or LF, and gives them the same steps on these pages.

How deep may the drain hose go?

The page warns against more than 4.5 inches (114 mm) in the standpipe, because of siphoning.

Can I tape over the drain opening?

No. The page says not to tape over the drain opening.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.