Maytag washer F-E / Washer

Maytag washer
error code F-E

No Maytag washer page prints F-E. Washer codes are written F#E#, for example F0E3 and F9E1, with a digit after both letters. Re-read the display, and have us visit if the washer keeps showing a code you cannot match.

No meaning in the Maytag documents we checked

Last reviewed

F-E
F-EWasher
Manual evidence

What the manual says about Maytag washer F-E.

Manual evidence

We read 134 Maytag washer code pages plus the site's sitemap of 3,104 addresses, and none prints F-E. The washer pages write their codes as F#E#, for example F0E3 or F9E1, and a few as letters such as LoC, dET or OFb.

Safe first steps.

  1. 1

    Read the display again

    Look for digits between the letters. A code such as F9E1 is an F, a number, an E and a number; a hyphen in place of the number, as in F-E, is a misread.

  2. 2

    Compare with the printed form

    Maytag prints F0E3, F9E1 and other F#E# codes, and short words such as LoC and dET. Match the shape before you match the meaning.

  3. 3

    Cut power for 5 minutes

    Where Maytag's washer F-code pages give a reset, it is a 5 minute power cut. Do that once, then restart the washer.

Write these down before you ring us.

Washers in a thoughtfully designed home
  • Model and serial number
  • Full display text
  • When the message appears
  • Checks you have already run

When to call.

The display keeps showing F-E or characters you cannot match to a Maytag code.

The washer halts mid-cycle with water still inside.

Book a visit(844) 752-7887

The documents we checked.

Source 1

F9 E1 - Front Load Washer - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com) / dateModified 2025-11-19; PH 14629 / PH 14629 (front-load washer)

Source 2

LoC or LC - Front Load Washer - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com) / dateModified 2025-06-04; PH 14584 / PH 14584 (front-load washer)

Source 3

dET - Front Load Washer - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com) / dateModified 2025-06-04; PH 14581 / PH 14581 (front-load washer)

Here to help

Good questions.
Clear answers.

Talk to our team
What does F-E mean on a Maytag washer?

Maytag does not say. No washer page we went through prints F-E; Maytag writes washer codes as F#E#, such as F9E1.

What should the display look like?

An F, a digit, an E and a digit for most codes. A few are short words: LoC, dET and OFb are printed.

Can I reset the washer?

Maytag's F-code pages that give a reset cut the power for 5 minutes. Try it a single time, and let us know if a code returns.

What if the washer stops and shows only letters?

Write the letters exactly, with capitals. If they match LoC, dET or OFb, those pages apply; if not, book a technician.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.