"Press Cancel to Reset" is a plain instruction: press the Cancel button or pad. Maytag says the message appears when a fault or error has been detected. If Call Service then shows, do the one-minute breaker reset and start a bake cycle.
"Press Cancel to Reset" is a plain instruction: press the Cancel button or pad. Maytag says the message appears when a fault or error has been detected. If Call Service then shows, do the one-minute breaker reset and start a bake cycle.
Press Cancel to Reset - Range - Product Help | Maytag
What Maytag oven Press Cancel to Reset means.
What it means
"Press Cancel to Reset" is a plain instruction: press the Cancel button or pad. Maytag says the message appears when a fault or error has been detected. If Call Service then shows, do the one-minute breaker reset and start a bake cycle.
What you can safely check
Turn the breaker off before you touch anything behind a panel.
When to call a technician
The message returns after Cancel and a full breaker reset.
Your Maytag to-do list, saved here on this device
Safe checks, in order.
0 of 4 checks done
Illustration. Follow your model’s instructions.
Before you begin
Press Cancel
Use the Cancel button or pad on the control. Product Help treats this as the whole first fix.
Illustration. Follow your model’s instructions.
Check 2
Watch the display
If the display clears, nothing further is asked on the page.
Illustration. Follow your model’s instructions.
Check 3
If Call Service appears
Product Help says to reset the power next. Breaker off one minute, on, then start a bake cycle.
Illustration. Follow your model’s instructions.
Check 4
Watch for one minute
Monitor the oven for a minute to see whether the message returns, then check that the oven works normally.
Does Press Cancel to Reset keep coming back?
Give us the model and the checks you have run, then open your request right here.
Product Help prints the same wording on both pages, and both end with the same reset: breaker off for one minute, on, a bake cycle and a minute of watching.
The W10722063B guide says that for an error code shown as a letter followed by a number, press CANCEL to clear the display, and if it reappears, call for service.