Maytag oven F2E6 / User interface

Maytag oven
error code F2E6

Oven / display reference

F2E6 on a range means Maytag suspects the user interface, the keypad, the control or the wiring. Begin with the reset; if the code is back afterward, book a technician.

Also printed as F2E6

Last reviewed

Oven / display reference
Meaning
F2E6 on a range means Maytag suspects the user interface, the keypad, the control or the wiring. Begin with the reset; if the code is back afterward, book a technician.
Who handles it
Reset, then book
Related codes
Source
F2 E6 - Error Code - Range - Product Help | Maytag

What Maytag oven F2E6 means.

What it means

F2E6 on a range means Maytag suspects the user interface, the keypad, the control or the wiring. Begin with the reset; if the code is back afterward, book a technician.

What you can safely check

Turn the breaker off before you touch anything behind a panel.

When to call a technician

F2E6 will not clear after one proper reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag oven F2E6: A hand pressing the control panel of a range with blue segment lights glowing, steel knobs beside it and a baking sheet on the glass cooktop.
    Illustration. Follow your model’s instructions.
    Before you begin

    Stay safe

    Turn the breaker off before you touch anything behind a panel. If you smell gas, leave the house and call your gas utility from outside.

  2. Ranges & ovens in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Match your model

    Record F2E6 character by character and note the product type: range.

  3. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 3

    Run the reset

    Leave the breaker off a whole minute before checking for F2E6 again.

  4. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Retest briefly

    Run the oven briefly after the reset and see whether F2E6 comes back.

  5. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    Wipe the panel of the range with a dry or barely damp cloth; spills and grease upset keys.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Have this ready

    Write down the model and serial numbers and the exact F2E6 wording before you call.

Does F2E6 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

The touch panel and control.

Conceptual Range / oven sectionKeypad / touch panelControl boardElement wiring123
  1. 1Keypad / touch panel
  2. 3Element wiring

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Parts behind the message.

A stainless wall oven under oak cabinets, its glass control strip showing blue lit segment characters.

Component reference

Oven control and user interface (F1-7, F1-8, F3, F6)

Maytag range pages for F1-7, F3 and F6 point at the control board of the oven, or the wiring to it.

Read the definition

A little more context.

Which entry in Maytag's range list covers F2E6?

A range showing F2E6 is, per Maytag, dealing with a possible problem in the user interface, the keypad, the control or the wiring. The page adds no diagnosis.

Read the supporting manual

Which first steps does Maytag give for F2E6?

Take the oven off power at the breaker for a full minute. Put it back on and give it a minute of watching; if F2E6 stays away, the reset did its job.

Read the supporting manual

How far apart are F2E6 and F2E5?

F2E5 carries the same parts list as F2E6 on the range page. The reset is the same, only the code differs.

Read the supporting manual

How careful should I be with the range while F2E6 is up?

If the display jumps or keys misfire, leave the range off until a technician has looked.

Read the supporting manual

The manual behind the message.

Manufacturer document

F2 E6 - Error Code - Range - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-08-16; PH 13771 / PH 13771 (range)

Manufacturer document

F2 E6 - Wall Oven - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-11-08; PH 14423 / PH 14423 (wall oven)

Scope for F2E6: Maytag range, PH 13771, checked November 2026. Maytag lists no models on the F2E6 page.

Here to help

Good questions.
Clear answers.

Talk to our team
How should I read F2E6 on my range?

The range page ties F2E6 to the user interface, the keypad, the control or the wiring without saying which has failed.

Will a one-minute breaker reset clear F2E6?

It is the page's first step and costs nothing. A returning F2E6 afterward means schedule us.

Does F2E6 point to a single part?

The list is the user interface, the keypad, the control or the wiring; testing on site settles it.

What do you need to know about F2E6?

The model number, what F2E6 looked like, and whether the reset changed anything.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.