What it means
Maytag's range page links F2E5 to the user interface, the keypad, the control or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
Maytag oven F2E5 / User interface
Maytag's range page links F2E5 to the user interface, the keypad, the control or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
Also printed as F2E5
Maytag's range page links F2E5 to the user interface, the keypad, the control or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.
F2E5 returns, or the range behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.

Record F2E5 character by character and note the product type: range.

Breaker off for one full minute, then back on, and look for F2E5.

Once power is back, keep an eye on the oven for about a minute for F2E5.

Wipe the panel of the range with a dry or barely damp cloth; spills and grease upset keys.
Keep the model number close and note when F2E5 appeared and what the range was doing.
Give us the model and the checks you have run, then open your request right here.
Book a visitA rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
Maytag range pages for F1-7, F3 and F6 point at the control board of the oven, or the wiring to it.
Read the definitionA range showing F2E5 is, per Maytag, dealing with a possible problem in the user interface, the keypad, the control or the wiring. The page adds no diagnosis.
Read the supporting manualMaytag's reset is a minute at the breaker: off, wait, on. Then leave the oven in view for another minute and note whether F2E5 returns.
Read the supporting manualF2E4 carries the same parts list as F2E5 on the range page. The reset is the same, only the code differs.
Read the supporting manualIf the display jumps or keys misfire, leave the range off until a technician has looked. Never open a panel on the range yourself.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13770 / PH 13770 (range)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14422 / PH 14422 (wall oven)
F2E5 comes from Maytag Product Help (PH 13770) for the range, read in November 2026; the F2E5 entry names no models.
F2E5 is printed against the user interface, the keypad, the control or the wiring; the page does not narrow it down.
Yes, give it the whole minute. If F2E5 is still there afterward, schedule a visit.
No. the user interface, the keypad, the control or the wiring are all candidates and the page gives no way to choose.
The model and serial numbers, the exact display for F2E5, and what the range was doing at the time.
Maytag codes, symptoms, parts and service
F2E4 on your range is tied by Maytag to the user interface, the keypad, the control or the wiring. One reset costs nothing; if the code survives it, schedule a visit.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
Maytag range pages for F1-7, F3 and F6 point at the control board of the oven, or the wiring to it. F1-8 also names the keypad and its interface. The only home step printed is a one-minute breaker reset, followed by watching the oven.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.