What it means
The Maytag range entry for F1E1 names the oven control or the wiring. Reset first, then call us in if the code keeps coming back.
Maytag oven F1E1 / Control board
The Maytag range entry for F1E1 names the oven control or the wiring. Reset first, then call us in if the code keeps coming back.
Also printed as F1E1
The Maytag range entry for F1E1 names the oven control or the wiring. Reset first, then call us in if the code keeps coming back.
Turn the breaker off before you touch anything behind a panel.
F1E1 returns, or the range behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Turn the breaker off before you touch anything behind a panel. If you smell gas, leave the house and call your gas utility from outside.

Check that your appliance is a range and copy F1E1 exactly as the display shows it.

Breaker off for one full minute, then back on, and look for F1E1.

Once power is back, keep an eye on the oven for about a minute for F1E1.

Note whether the display, keys and lights of the range behave normally, or whether other odd things happen near F1E1.
Keep the model number close and note when F1E1 appeared and what the range was doing.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
Maytag range pages for F1-7, F3 and F6 point at the control board of the oven, or the wiring to it.
Read the definitionFor F1E1 the range entry names the oven control or the wiring. Nothing in it says which of them has failed.
Read the supporting manualTurn the oven's circuit breaker off for one minute, switch it back on, then keep an eye on the oven for a further minute to see whether F1E1 comes back.
Read the supporting manualMaytag gives F1E0 and F1E1 the same wording on the range page, so the same first step fits both.
Read the supporting manualIf the range behaves after the reset, using it is up to you; if F1E1 returns, stop and schedule a visit. Never open a panel on the range yourself.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13759 / PH 13759 (range)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14407 / PH 14407 (wall oven)
Scope for F1E1: Maytag range, PH 13759, checked November 2026. Maytag lists no models on the F1E1 page.
Maytag lists the oven control or the wiring. It is a possible-cause list, not a confirmed failure.
When F1E1 is on the display of a range, it is the page's first step and costs nothing. A returning the code afterward means schedule us.
Not from the code alone: the entry lists the oven control or the wiring and stops.
The model number, what F1E1 looked like, and whether the reset changed anything.
Maytag codes, symptoms, parts and service
F1 E0 is read differently on the two Maytag trees. The range page names the oven control or its wiring. On Maytag's wall oven list the suspects are the user interface (touchpad), the control or the wiring. Reset the breaker for one minute and note whether the keys respond.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
Maytag range pages for F1-7, F3 and F6 point at the control board of the oven, or the wiring to it. F1-8 also names the keypad and its interface. The only home step printed is a one-minute breaker reset, followed by watching the oven.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.