What it means
4d12 on a range means Maytag suspects the oven door latch assembly, the door switch or the wiring. Begin with the reset; if the code is back afterward, book a technician.
Maytag oven 4d12 / Door and lid
4d12 on a range means Maytag suspects the oven door latch assembly, the door switch or the wiring. Begin with the reset; if the code is back afterward, book a technician.
Also printed as 4d12
4d12 on a range means Maytag suspects the oven door latch assembly, the door switch or the wiring. Begin with the reset; if the code is back afterward, book a technician.
Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.
4d12 repeats after the reset.
Your Maytag to-do list, saved here on this device

Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.

Match the label on your appliance to the range list before you rely on the wording for 4d12.

Leave the breaker off a whole minute before checking for 4d12 again.

Run the oven briefly after the reset and see whether 4d12 comes back.

Look at the door seal on the range: it should close fully with nothing caught in it.
Note the model and the moment 4d12 showed up; both help us plan.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
F5 on a Maytag range or wall oven names the door latch assembly, the latch switches and the wiring as suspects.
Read the definitionFor 4d12 the range entry names the oven door latch assembly, the door switch or the wiring. Nothing in it says which of them has failed.
Read the supporting manualMaytag's reset is a minute at the breaker: off, wait, on. Then leave the oven in view for another minute and note whether 4d12 returns.
Read the supporting manual4d11 carries the same parts list as 4d12 on the range page. The reset is the same, only the code differs.
Read the supporting manualEveryday cooking can go on if the door closes fully, but avoid any cleaning cycle.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13716 / PH 13716 (range)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14376 / PH 14376 (wall oven)
Scope for 4d12: Maytag range, PH 13716, checked November 2026. Maytag lists no models on the 4d12 page.
The range page ties 4d12 to the oven door latch assembly, the door switch or the wiring without saying which has failed.
Yes, give it the whole minute. If 4d12 is still there afterward, schedule a visit.
The list is the oven door latch assembly, the door switch or the wiring; testing on site settles it.
The model and serial numbers, the exact display for 4d12, and what the range was doing at the time.
Maytag codes, symptoms, parts and service
The Maytag range entry for 4d11 names the oven door latch assembly, the door switch or the wiring. Reset first, then call us in if the code keeps coming back.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
F5 on a Maytag range or wall oven names the door latch assembly, the latch switches and the wiring as suspects. Product Help gives a one-minute breaker reset and asks you to verify oven operation afterward. A steam oven F5 page lists the reset alone.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.