What it means
Maytag's commercial-grade residential dryer page words F71 like this: “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Try the five-minute power-off reset, and schedule a visit if the code returns.
Maytag dryer F71 / Reset only
Maytag's commercial-grade residential dryer page words F71 like this: “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Try the five-minute power-off reset, and schedule a visit if the code returns.
Also printed as F71
Maytag's commercial-grade residential dryer page words F71 like this: “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Try the five-minute power-off reset, and schedule a visit if the code returns.
Unplug the dryer or switch off its breaker before opening any panel, clean lint regularly, and if you smell gas leave the house and call your gas utility.
F71 will not clear after one proper reset.
Your Maytag to-do list, saved here on this device

Unplug the dryer or switch off its breaker before opening any panel, clean lint regularly, and if you smell gas leave the house and call your gas utility.

Check that your appliance is a commercial-grade residential dryer and copy F71 exactly as the display shows it.

Power off for five full minutes, then on, and look for F71.

Give the dryer a minute on screen after the reset; a returning F71 means schedule a visit.

Check your model manual for what F71 means before treating it as a breakdown.
Keep the model number close and note when F71 appeared and what the commercial-grade residential dryer was doing.
Give us the model and the checks you have run, then open your request right here.
Book a visitA rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
The commercial-grade residential dryer entry for F71 reads “Power unit down by turning off the circuit breaker(s) for 5 minutes.” That is the whole explanation Maytag prints.
Read the supporting manualLeave the dryer off power for five full minutes, switch it back on, and check the display for F71.
Read the supporting manualF70 is a neighbor of F71, not a synonym. The reset may overlap; the text does not.
Read the supporting manualUse the commercial-grade residential dryer if it behaves normally; stop if there are odd noises, smells or heat. If F71 keeps returning, stop and schedule a visit.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2021-07-28; PH 11832 / PH 11832 (commercial-grade residential dryer)
F71 comes from Maytag Product Help (PH 11832) for the commercial-grade residential dryer, read in November 2026; the F71 entry names no models.
The commercial-grade residential dryer page reads “Power unit down by turning off the circuit breaker(s) for 5 minutes.” It prints nothing more about cause.
Wait the whole five minutes, not less. If F71 persists, a technician should look.
No part is named for F71; the page gives only the wording above.
Tell us the model, the display wording and when F71 first showed up.
Maytag codes, symptoms, parts and service
On a commercial-grade residential dryer, the entry for F70 says “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Try the five-minute power-off reset, and schedule a visit if the code returns.
A Maytag dryer that does nothing is usually a power, lock or latch issue before it is a broken part. An electric dryer draws on two breakers or fuses and needs 240 volts, the Control Lock may be on, and the door may look shut without latching. Check these, then book a technician.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.