What it means
On a commercial-grade residential dryer, the entry for F3E4 says “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
Maytag dryer F3E4 / Reset only
On a commercial-grade residential dryer, the entry for F3E4 says “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
Also printed as F3E4
On a commercial-grade residential dryer, the entry for F3E4 says “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
Unplug the dryer or switch off its breaker before opening any panel, clean lint regularly, and if you smell gas leave the house and call your gas utility.
F3E4 repeats after the reset.
Your Maytag to-do list, saved here on this device

Unplug the dryer or switch off its breaker before opening any panel, clean lint regularly, and if you smell gas leave the house and call your gas utility.

Match the label on your appliance to the commercial-grade residential dryer list before you rely on the wording for F3E4.

Power off for five full minutes, then on, and look for F3E4.

Once power is back, keep an eye on the dryer for about a minute for F3E4.

Check your model manual for what F3E4 means before treating it as a breakdown.
Keep the model number close and note when F3E4 appeared and what the commercial-grade residential dryer was doing.
Give us the model and the checks you have run, then open your request right here.
Book a visitA rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
The commercial-grade residential dryer entry for F3E4 reads “Power unit down by turning off the circuit breaker(s) for 5 minutes.” That is the whole explanation Maytag prints.
Read the supporting manualLeave the dryer off power for five full minutes, switch it back on, and check the display for F3E4.
Read the supporting manualF3E2 is a separate entry from F3E4 on the commercial-grade residential dryer page, with its own wording.
Read the supporting manualUse the commercial-grade residential dryer if it behaves normally; stop if there are odd noises, smells or heat. Never open a panel on the commercial-grade residential dryer yourself.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2025-10-21; PH 11824 / PH 11824 (commercial-grade residential dryer)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2025-04-11; PH 12808 / PH 12808 (dryer)
Scope for F3E4: Maytag commercial-grade residential dryer, PH 11824, checked November 2026. Maytag lists no models on the F3E4 page.
The commercial-grade residential dryer page reads “Power unit down by turning off the circuit breaker(s) for 5 minutes.” It prints nothing more about cause.
Try it first; five minutes is the printed time. A returning F3E4 means schedule us.
Maytag names no part here. Read the message and follow the steps.
The model number, what F3E4 looked like, and whether the reset changed anything.
Maytag codes, symptoms, parts and service
F3E2 on a Maytag commercial-grade residential dryer is explained as “F3E2 - Moisture Sensor.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
A Maytag dryer that does nothing is usually a power, lock or latch issue before it is a broken part. An electric dryer draws on two breakers or fuses and needs 240 volts, the Control Lock may be on, and the door may look shut without latching. Check these, then book a technician.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.