What it means
Maytag's commercial-grade residential dryer page words F20 like this: “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Try the five-minute power-off reset, and schedule a visit if the code returns.
Maytag dryer F20 / Reset only
Maytag's commercial-grade residential dryer page words F20 like this: “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Try the five-minute power-off reset, and schedule a visit if the code returns.
Also printed as F20
Maytag's commercial-grade residential dryer page words F20 like this: “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Try the five-minute power-off reset, and schedule a visit if the code returns.
Unplug the dryer or switch off its breaker before opening any panel, clean lint regularly, and if you smell gas leave the house and call your gas utility.
F20 repeats after the reset.
Your Maytag to-do list, saved here on this device

Unplug the dryer or switch off its breaker before opening any panel, clean lint regularly, and if you smell gas leave the house and call your gas utility.

Record F20 character by character and note the product type: commercial-grade residential dryer.

Wait five minutes without power before you check for F20 again.

Once power is back, keep an eye on the dryer for about a minute for F20.

Write down the exact words or symbols the commercial-grade residential dryer shows before you do anything.
Keep the model number close and note when F20 appeared and what the commercial-grade residential dryer was doing.
Give us the model and the checks you have run, then open your request right here.
Book a visitA rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
Here is what Maytag prints for F20 on a commercial-grade residential dryer: “Power unit down by turning off the circuit breaker(s) for 5 minutes.”
Read the supporting manualCut power to the dryer for five minutes at the breaker or by cycling power as the page says, then restore it and see whether F20 comes back.
Read the supporting manualF02 is a neighbor of F20, not a synonym. The reset may overlap; the text does not.
Read the supporting manualWhen in doubt, switch the commercial-grade residential dryer off.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2025-10-21; PH 11812 / PH 11812 (commercial-grade residential dryer)
Scope for F20: Maytag commercial-grade residential dryer, PH 11812, checked November 2026. Maytag lists no models on the F20 page.
On the commercial-grade residential dryer page the line is “Power unit down by turning off the circuit breaker(s) for 5 minutes.” No further cause is given.
It may. Cut power for the full five minutes, restore it and watch. If F20 returns, schedule a visit.
No part is named for F20; the page gives only the wording above.
Tell us the model, the display wording and when F20 first showed up.
Maytag codes, symptoms, parts and service
The Maytag page for F02 on a commercial-grade residential dryer states “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Try the five-minute power-off reset, and schedule a visit if the code returns.
A Maytag dryer that does nothing is usually a power, lock or latch issue before it is a broken part. An electric dryer draws on two breakers or fuses and needs 240 volts, the Control Lock may be on, and the door may look shut without latching. Check these, then book a technician.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.