What it means
Maytag's commercial-grade residential dryer page words F22 like this: “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Try the five-minute power-off reset, and schedule a visit if the code returns.
Maytag dryer F22 / Reset only
Maytag's commercial-grade residential dryer page words F22 like this: “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Try the five-minute power-off reset, and schedule a visit if the code returns.
Also printed as F22
Maytag's commercial-grade residential dryer page words F22 like this: “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Try the five-minute power-off reset, and schedule a visit if the code returns.
Unplug the dryer or switch off its breaker before opening any panel, clean lint regularly, and if you smell gas leave the house and call your gas utility.
F22 repeats after the reset.
Your Maytag to-do list, saved here on this device

Unplug the dryer or switch off its breaker before opening any panel, clean lint regularly, and if you smell gas leave the house and call your gas utility.

Check that your appliance is a commercial-grade residential dryer and copy F22 exactly as the display shows it.

Power off for five full minutes, then on, and look for F22.

Once power is back, keep an eye on the dryer for about a minute for F22.

Note when F22 appears: at start, mid-cycle or after a power cut.
Keep the model number close and note when F22 appeared and what the commercial-grade residential dryer was doing.
Give us the model and the checks you have run, then open your request right here.
Book a visitA rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
Maytag's commercial-grade residential dryer page gives F22 a single line: “Power unit down by turning off the circuit breaker(s) for 5 minutes.” It adds nothing about cause.
Read the supporting manualMaytag asks for five minutes without power. Wait the full time, restore power, and note whether F22 reappears.
Read the supporting manualF20 is a neighbor of F22, not a synonym. The reset may overlap; the text does not.
Read the supporting manualWhen in doubt, switch the commercial-grade residential dryer off. If F22 keeps returning, stop and schedule a visit.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2025-10-21; PH 11813 / PH 11813 (commercial-grade residential dryer)
F22 comes from Maytag Product Help (PH 11813) for the commercial-grade residential dryer, read in November 2026; the F22 entry names no models.
The commercial-grade residential dryer page reads “Power unit down by turning off the circuit breaker(s) for 5 minutes.” It prints nothing more about cause.
Wait the whole five minutes, not less. If F22 persists, a technician should look.
No part is named for F22; the page gives only the wording above.
The model number, what F22 looked like, and whether the reset changed anything.
Maytag codes, symptoms, parts and service
Maytag's commercial-grade residential dryer page words F20 like this: “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Try the five-minute power-off reset, and schedule a visit if the code returns.
A Maytag dryer that does nothing is usually a power, lock or latch issue before it is a broken part. An electric dryer draws on two breakers or fuses and needs 240 volts, the Control Lock may be on, and the door may look shut without latching. Check these, then book a technician.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.