What it means
The Maytag page for F02 on a commercial-grade residential dryer states “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Try the five-minute power-off reset, and schedule a visit if the code returns.
Maytag dryer F02 / Reset only
The Maytag page for F02 on a commercial-grade residential dryer states “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Try the five-minute power-off reset, and schedule a visit if the code returns.
Also printed as F02
The Maytag page for F02 on a commercial-grade residential dryer states “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Try the five-minute power-off reset, and schedule a visit if the code returns.
Unplug the dryer or switch off its breaker before opening any panel, clean lint regularly, and if you smell gas leave the house and call your gas utility.
F02 repeats after the reset.
Your Maytag to-do list, saved here on this device

Unplug the dryer or switch off its breaker before opening any panel, clean lint regularly, and if you smell gas leave the house and call your gas utility.

Match the label on your appliance to the commercial-grade residential dryer list before you rely on the wording for F02.

Power off for five full minutes, then on, and look for F02.

Give the dryer a minute on screen after the reset; a returning F02 means schedule a visit.

Write down the exact words or symbols the commercial-grade residential dryer shows before you do anything.
Write down the model and serial numbers and the exact F02 wording before you call.
Give us the model and the checks you have run, then open your request right here.
Book a visitA rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
Here is what Maytag prints for F02 on a commercial-grade residential dryer: “Power unit down by turning off the circuit breaker(s) for 5 minutes.”
Read the supporting manualCut power to the dryer for five minutes at the breaker or by cycling power as the page says, then restore it and see whether F02 comes back.
Read the supporting manualF01 is a neighbor of F02, not a synonym. The reset may overlap; the text does not.
Read the supporting manualWhether the commercial-grade residential dryer is safe depends on how it behaves, not the message alone. If F02 keeps returning, stop and schedule a visit.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2025-10-21; PH 11810 / PH 11810 (commercial-grade residential dryer)
Scope for F02: Maytag commercial-grade residential dryer, PH 11810, checked November 2026. Maytag lists no models on the F02 page.
On the commercial-grade residential dryer page the line is “Power unit down by turning off the circuit breaker(s) for 5 minutes.” No further cause is given.
Try it first; five minutes is the printed time. A returning F02 means schedule us.
No part is named for F02; the page gives only the wording above.
The model and serial numbers, the exact display for F02, and what the commercial-grade residential dryer was doing at the time.
Maytag codes, symptoms, parts and service
F01 on a Maytag commercial-grade residential dryer is explained as “Power unit down by turning off the circuit breaker(s) for 5 minutes.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
A Maytag dryer that does nothing is usually a power, lock or latch issue before it is a broken part. An electric dryer draws on two breakers or fuses and needs 240 volts, the Control Lock may be on, and the door may look shut without latching. Check these, then book a technician.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.