What it means
On a dryer, the entry for F1E4 says “A 'F1E4' code in the display indicates there may be an issue with the control unit or the associated wiring.” Try the five-minute power-off reset, and schedule a visit if the code returns.
Maytag dryer F1E4 / Control board
On a dryer, the entry for F1E4 says “A 'F1E4' code in the display indicates there may be an issue with the control unit or the associated wiring.” Try the five-minute power-off reset, and schedule a visit if the code returns.
Also printed as F1E4
On a dryer, the entry for F1E4 says “A 'F1E4' code in the display indicates there may be an issue with the control unit or the associated wiring.” Try the five-minute power-off reset, and schedule a visit if the code returns.
Power off before any panel comes off; lint and burnt smells mean stop and leave the dryer off.
F1E4 will not clear after one proper reset.
Your Maytag to-do list, saved here on this device

Power off before any panel comes off; lint and burnt smells mean stop and leave the dryer off.

Check that your appliance is a dryer and copy F1E4 exactly as the display shows it.

Power off for five full minutes, then on, and look for F1E4.

Run the dryer briefly after the reset and see whether F1E4 comes back.

Note whether the display, keys and lights of the dryer behave normally, or whether other odd things happen near F1E4.
Keep the model number close and note when F1E4 appeared and what the dryer was doing.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
F1E4 is covered by this wording on the dryer page: “A 'F1E4' code in the display indicates there may be an issue with the control unit or the associated wiring.”
Read the supporting manualMaytag asks for five minutes without power. Wait the full time, restore power, and note whether F1E4 reappears.
Read the supporting manualThe dryer list prints F1E5 next to F1E4, but with a different line. Look up the one on your display.
Read the supporting manualThe control runs everything on the dryer, so a returning F1E4 is a reason to stop using it.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2025-05-27; PH 12790 / PH 12790 (dryer)
Facts for F1E4 are from the dryer table (PH 12790) of Maytag Product Help, checked November 2026; no model list is printed.
If F1E4 is up on the dryer, Maytag's wording is “A 'F1E4' code in the display indicates there may be an issue with the control unit or the associated wiring.” That is the whole entry.
It may. Cut power for the full five minutes, restore it and watch. If F1E4 returns, schedule a visit.
Not by itself; the page stops at the line it prints.
The model and serial numbers, the exact display for F1E4, and what the dryer was doing at the time.
Maytag codes, symptoms, parts and service
F1E5 on a Maytag dryer is explained as “A 'F1E5' code in the display indicates there may be an issue with the control unit or the associated wiring.” Nothing else is printed, so schedule a visit if it repeats.
A Maytag dryer that does nothing is usually a power, lock or latch issue before it is a broken part. An electric dryer draws on two breakers or fuses and needs 240 volts, the Control Lock may be on, and the door may look shut without latching. Check these, then book a technician.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.