What it means
For a dryer showing F1E3, Maytag prints “An 'F1E3' code in the display indicates there may be an issue with the control unit or the associated wiring.” Maytag prints no reset for it; if it keeps appearing, schedule a visit.
Maytag dryer F1E3 / Control board
For a dryer showing F1E3, Maytag prints “An 'F1E3' code in the display indicates there may be an issue with the control unit or the associated wiring.” Maytag prints no reset for it; if it keeps appearing, schedule a visit.
Also printed as F1E3
For a dryer showing F1E3, Maytag prints “An 'F1E3' code in the display indicates there may be an issue with the control unit or the associated wiring.” Maytag prints no reset for it; if it keeps appearing, schedule a visit.
Unplug the dryer or switch off its breaker before opening any panel, clean lint regularly, and if you smell gas leave the house and call your gas utility.
F1E3 will not clear after one proper reset.
Your Maytag to-do list, saved here on this device

Unplug the dryer or switch off its breaker before opening any panel, clean lint regularly, and if you smell gas leave the house and call your gas utility.

Match the label on your appliance to the dryer list before you rely on the wording for F1E3.

No reset is printed here; note the behavior of the dryer around F1E3 instead.

Keep the model number close and note when F1E3 appeared and what the dryer was doing.

The control board lives behind panels on the dryer; keep them closed.
Keep the model number close and note when F1E3 appeared and what the dryer was doing.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
F1E3 is covered by this wording on the dryer page: “An 'F1E3' code in the display indicates there may be an issue with the control unit or the associated wiring.”
Read the supporting manualNo reset is printed for F1E3 on the dryer page. Writing down what the dryer does around the code is the useful thing to do.
Read the supporting manualF6E1 is a separate entry from F1E3 on the dryer page, with its own wording.
Read the supporting manualA control problem can stop heating or cause odd behavior, so stay near the dryer while it runs. Never open a panel on the dryer yourself.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2025-04-11; PH 12787 / PH 12787 (dryer)
Facts for F1E3 are from the dryer table (PH 12787) of Maytag Product Help, checked November 2026; no model list is printed.
The dryer page reads “An 'F1E3' code in the display indicates there may be an issue with the control unit or the associated wiring.” It prints nothing more about cause.
There is no reset on that page. Note what happens and book us if F1E3 persists.
Maytag names no part here. Read the message and follow the steps.
Model and serial numbers plus a note of what happened when F1E3 appeared.
Maytag codes, symptoms, parts and service
The Maytag commercial-grade residential dryer entry for F6E1 names the main control board, the user interface (touchpad) or the wiring. Reset first, then call us in if the code keeps coming back.
A Maytag dryer that does nothing is usually a power, lock or latch issue before it is a broken part. An electric dryer draws on two breakers or fuses and needs 240 volts, the Control Lock may be on, and the door may look shut without latching. Check these, then book a technician.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.