What it means
F2E1 on a Maytag dryer is explained as “F2E1 - Keypad.” Try the one-minute breaker reset, and schedule a visit if the code returns.
Maytag dryer F2E1 / User interface
F2E1 on a Maytag dryer is explained as “F2E1 - Keypad.” Try the one-minute breaker reset, and schedule a visit if the code returns.
Also printed as F2E1
F2E1 on a Maytag dryer is explained as “F2E1 - Keypad.” Try the one-minute breaker reset, and schedule a visit if the code returns.
Unplug the dryer or switch off its breaker before opening any panel, clean lint regularly, and if you smell gas leave the house and call your gas utility.
F2E1 returns, or the dryer behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Unplug the dryer or switch off its breaker before opening any panel, clean lint regularly, and if you smell gas leave the house and call your gas utility.

Check that your appliance is a dryer and copy F2E1 exactly as the display shows it.

Leave the breaker off a whole minute before checking for F2E1 again.

Run the dryer briefly after the reset and see whether F2E1 comes back.

Do not pry at the panel; the keypad connections are bench work.
Note the model and the moment F2E1 showed up; both help us plan.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
Here is what Maytag prints for F2E1 on a dryer: “F2E1 - Keypad.”
Read the supporting manualMaytag's reset is a minute at the breaker: off, wait, on. Then leave the dryer in view for another minute and note whether F2E1 returns.
Read the supporting manualF1E4 is a neighbor of F2E1, not a synonym. The reset may overlap; the text does not.
Read the supporting manualIf the display jumps or keys misfire, leave the dryer off until a technician has looked. Never open a panel on the dryer yourself.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2026-08-19; PH 12799 / PH 12799 (dryer)
Facts for F2E1 are from the dryer table (PH 12799) of Maytag Product Help, checked November 2026; no model list is printed.
If F2E1 is up on the dryer, the help page states “F2E1 - Keypad.” Nothing else is added.
Yes, give it the whole minute. If F2E1 is still there afterward, schedule a visit.
No part is named for F2E1; the page gives only the wording above.
The model and serial numbers, the exact display for F2E1, and what the dryer was doing at the time.
Maytag codes, symptoms, parts and service
On a dryer, the entry for F1E4 says “A 'F1E4' code in the display indicates there may be an issue with the control unit or the associated wiring.” Try the five-minute power-off reset, and schedule a visit if the code returns.
A Maytag dryer that does nothing is usually a power, lock or latch issue before it is a broken part. An electric dryer draws on two breakers or fuses and needs 240 volts, the Control Lock may be on, and the door may look shut without latching. Check these, then book a technician.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.