Inside the appliance
Dishwasher thermistor and OWI sensor (F3E2). In plain English.
F3E2 on a Maytag dishwasher lists a thermistor or OWI sensor as the potential cause. Product Help offers one home step: cut power to the dishwasher for 30 seconds, by unplugging it or by switching its breaker off. A returning code means scheduling service.

Where it fits.
Dishwasher thermistor and OWI sensor (F3E2) in the appliance
Product Help does not say where the sensor sits on your model.
This image is an example of the component type. It will not tell you which replacement is right for your model.
How you can tell this system is asking for attention.
Dishwasher thermistor and OWI sensor (F3E2) trouble can show up along with weaker performance or a code that keeps coming back. It takes testing to say whether this component is the reason.
Owner care, within the model instructions.
Power the machine down and pull the plug ahead of any check you make yourself. Beware of pooled water and sharp bits of debris. Never handle a wet plug or electrical parts, take off a service panel or go beyond what your model’s owner guide permits.
- 1
Read F3E2
Confirm the code is F3E2, not F3E1 or another F3.
- 2
Cut power for 30 seconds
Pull the plug, or switch off its breaker, and wait half a minute.
- 3
Restore and run
Plug back in or switch the breaker on, then start a cycle.
- 4
Note the result
If F3E2 returns, write down when it appears during the cycle.
Cleaning or replacement?
Leave internal testing to a technician.
F3E2 appears again after the half-minute reset.
Dishes come out cold-washed or wet.
The dishwasher stops mid-cycle.
Arrange a diagnosticSources and model boundaries.
These sources stand behind the Dishwasher thermistor and OWI sensor (F3E2) advice. Read the manual for your own model.
- F3E2- Dishwasher - Product Help | Maytag
Follow the guide for your own model, and see how we research these pages.
What does F3E2 mean?
Potential Cause: Thermistor or OWI Sensor, per Maytag Product Help.
What is an OWI sensor?
The page does not explain the abbreviation, so we do not either.
How long to unplug the dishwasher?
30 seconds for dishwashers, versus 5 minutes on Maytag washers.
Does a hard-wired unit work the same?
Yes. Turn the breaker off for 30 seconds instead of unplugging.
Maytag codes, symptoms, parts and service
From the message to what you do next.
Maytag dishwasher F3E2 error code
Maytag's page on F3E2 for the dishwasher says the potential cause it lists is: the trouble is in the thermistor or the OWI sensor. To reset it, leave the circuit breaker off for 30 seconds before switching it back on. A repeat of the code after the reset is the cue to schedule a visit with us.
Maytag dishwasher burning smell
A burnt smell from a Maytag dishwasher is often plastic or food that fell by the heating element. Let the tub cool for at least 30 minutes, clear the debris, and run a rinse or cleaning cycle. A hot tar or petroleum smell on a new dishwasher is the sound-deadening coating and should fade in 4 to 6 weeks.
Dishwasher repair
Book a diagnostic for your model, done at the machine.
Find your metro
Office details, and the entry information to pass along.


