Inside the appliance
Dishwasher drain system (F9E1, F9E2). In plain English.
F9E1 on a Maytag dishwasher is a long drain and F9E2 is a drain motor error. Product Help lists the checks: clean the filter under running water, look for a kinked or clogged drain hose, and confirm the garbage disposer knockout plug is out on a new installation.

Where it fits.
Dishwasher drain system (F9E1, F9E2) in the appliance
Product Help covers the drain hose between the machine and the sink. It does not locate the filter on your model.
This image is an example of the component type. It will not tell you which replacement is right for your model.
How you can tell this system is asking for attention.
Dishwasher drain system (F9E1, F9E2) trouble can show up along with weaker performance or a code that keeps coming back. It takes testing to say whether this component is the reason.
Owner care, within the model instructions.
Power the machine down and pull the plug ahead of any check you make yourself. Beware of pooled water and sharp bits of debris. Never handle a wet plug or electrical parts, take off a service panel or go beyond what your model’s owner guide permits.
- 1
Clean the filter
Remove it and rinse it thoroughly under running water.
- 2
Straighten the hose
Trace the hose from the machine back to the sink; look for kinks, pinches or clogs.
- 3
Check the disposer
If connected, make sure it is clear and, on a new installation, that the knockout plug is out.
- 4
Cycle power
Then cycle power for 30 seconds and resume.
Cleaning or replacement?
Leave internal testing to a technician.
F9E1 or F9E2 returns after the checks.
Standing water stays in the tub.
Water rises in the sink basin.
Arrange a diagnosticSources and model boundaries.
These sources stand behind the Dishwasher drain system (F9E1, F9E2) advice. Read the manual for your own model.
- 9 Pause 1 Pause - pause, repeat - Error Code - Dishwasher - Product Help | Maytag
- F9E2 - Dishwasher - Product Help | Maytag
- Dishwasher Error Codes - Reading - Product Help | Maytag
Follow the guide for your own model, and see how we research these pages.
What does F9E1 mean?
Long Drain. Product Help lists the filter, hose, disposer and air gap as checks before you resume the cycle.
Is F9E2 different?
Yes. Its cause is a drain motor error, and the troubleshooting list adds the knockout plug and disposer check.
What is the knockout plug?
Product Help asks you to confirm it was removed from the garbage disposer on a new installation. It gives no further detail.
Can the air gap cause it?
If you have one, it can clog. The page gives no cleaning steps, so book a technician if it seems blocked.
Maytag codes, symptoms, parts and service
From the message to what you do next.
Maytag dishwasher F9E1 error code
For a Maytag dishwasher, Maytag's page for F9E1 says the potential cause it lists is: the drain takes too long. To reset it, leave the circuit breaker off for 30 seconds before switching it back on. Arrange a technician visit with us if the display shows it again after the reset.
Maytag dishwasher burning smell
A burnt smell from a Maytag dishwasher is often plastic or food that fell by the heating element. Let the tub cool for at least 30 minutes, clear the debris, and run a rinse or cleaning cycle. A hot tar or petroleum smell on a new dishwasher is the sound-deadening coating and should fade in 4 to 6 weeks.
Dishwasher repair
Book a diagnostic for your model, done at the machine.
Find your metro
Office details, and the entry information to pass along.


